Deep-Sea Drilling Pressures

2D companion of the deep-sea drilling sim: mud that is too light lets the rock push in, mud that is too heavy cracks the rock.

Switch to 3D

Presets

Playback

Apparatus

Model checks

The science

What is modelled

A well stays under control when the pressure of the mud column is higher than the pressure of the fluid in the rock (the pore pressure) but lower than the pressure that would crack the rock (the fracture pressure). In deep water the sea itself takes much of the depth, so the gap between those limits is narrow. Pumping mud adds friction in the annulus, raising the effective pressure at the bit while it circulates.

Equations

  • Compressible seawater dp/dz = ρ0 (1 + β p) g, so p = (eρ0 g β h − 1) / β.
  • Overburden σob = psea + g ∫ ρb dz with a compacting sediment density.
  • Fracture pressure (Eaton) pf = pp + ν/(1 − ν) (σob − pp).
  • Equivalent circulating density adds c (Q / Q0)1.8 times the annulus length to the mud pressure.

Checks run in the page

  • Integrating the compressible seawater column reproduces the closed form.
  • Simpson integration of the sediment density reproduces the overburden.
  • Stepping the bit down finds the same first violation as bisection on the pressure margins.

Honest simplifications

The sediment is one layered profile with a smooth overpressure ramp, the Poisson ratio is constant, the mud has no temperature or compressibility effects, casing and kick control are not modelled, and the numbers illustrate the physics of a pressure window rather than a well plan.

What to try
  • Press Mud too light: kick and find the depth where the blue pore-pressure line crosses the green mud line.
  • Press Mud too heavy: losses to see the fracture line stop the well.
  • Press Deep water, narrow window and compare the width of the window.
Pressures against depth
Sediment density against depth
Pressure added by circulation
Safe depth against mud weight