Presets
Playback
Parameters
Camera
Layers
Quality
Model check
The science
What is modelled
Cars drive along a one-lane arterial with five signalised intersections. Each driver follows the Intelligent Driver Model (IDM): accelerate towards a desired speed, but keep a safe time headway to the car in front, and brake for a red or amber signal when it is comfortable to stop. The signals share one cycle length, but their start times (offsets) differ. In a green wave the offsets equal the travel time between signals at the progression speed, so a platoon driving at that speed meets a green light every time.
Equations
- IDM acceleration:
a = A [1 − (v/v0)4 − (s*/s)²], desired gaps* = s0 + vT + vΔv / (2√(A b)), with A = 1.3 m/s², comfortable braking b = 2 m/s², minimum gap s0 = 2 m. - Drivers anticipate the phase: a signal within 200 m acts as a stationary obstacle at the stop line only if it will not be green when the car gets there (time of arrival = distance / speed); a car that sees a freshly amber light keeps going if stopping would need more than 4 m/s².
- Offsets: green wave
offi = i (D/vp + error) mod C; simultaneousoffi = 0; alternatingoffi = (i mod 2) C/2. - Free acceleration time:
t(v) = (v0/2A) [atanh(u) + atan(u)],u = v/v0. Equilibrium gap:se = (s0 + vT) / √(1 − (v/v0)4). - Time-space diagram: each line is one car; green, amber and red bars show the signal phases at each intersection. A band of green that slopes at the progression speed is the green wave.
Checks run in the page
- The simulated time for a car to accelerate from rest to 90 % of its desired speed is compared with the closed-form IDM expression.
- The simulated gap behind a leader at constant speed is compared with the equilibrium-gap formula.
- A single car driving at the progression speed is sent through the green-wave plan: it must meet no red light, make no stop, and take (N − 1) D / vp seconds between the first and last stop line.
Honest simplifications
Traffic is a single lane in one direction with identical signal timing; there is no turning traffic, no cross-street queues, no pedestrians and no lane changing. Drivers have slightly different desired speeds; the bus share only changes length and desired speed. The IDM parameters are typical textbook values, not calibrated to a particular street. The statistics (stops per car, delay) come from a seeded random arrival process, so two runs with other seeds differ by a few percent. The bar chart and the offset-error sweep run separate 700 s simulations with the same parameters.
What to try
- Compare the four offset plans in the bar chart: the green wave gives the fewest stops, simultaneous signals the most.
- Add an offset error of 15 s: the wave is destroyed and stops return, although the cycle and the green share are unchanged.
- Set the progression speed far from the drivers' desired speed: the platoon spreads out and drifts out of the green band.
- Increase the flow to 1000 vehicles per hour or cut the green share to 35 %: when demand approaches the capacity of the green share, queues form and no offset plan can remove them.