Presets
Playback
Quick folds
Sheet
Folding
Camera
Layers
Quality
Model check
The science
What is modelled
A sheet of paper of length L is divided into N equal strips joined by hinges (the creases). Alternate creases are mountain and valley folds, so the sheet becomes an accordion or fan. Each strip is treated as a rigid panel and each crease as an ideal hinge. The sheet is anchored at its left end; the right end slides in as the fold fraction f grows.
Equations
- Strip width
s = L / N. Strips are tilted alternately by+βand−βfrom the horizontal, withβ = f · βmax(βmax = 84°). The angle between neighbouring strips at a crease isπ − 2β. - End-to-end span
X = N s cos β, so the sheet shortens by1 − cos β. The path length along the strips stays exactlyN s = L. - Parallel straight creases have no interior vertex, so Maekawa's rule
|M − V| = 2for a flat-foldable vertex does not apply: mountains and valleys simply alternate. - Single-direction folding limit (Gallivan, 2002): folding a strip of thickness t in half n times needs a length
L = (π t / 6)(2n + 4)(2n − 1). It is the sum of the half-circle bends of every layer at every fold,ΔLn = (π t / 2)(4n−1 + 2n−1). - Ideal doubling: after n halvings there are
2nlayers and thickness2n t. With t = 0.1 mm the thickness would pass the Earth-Moon distance (3.84×108 m) at n = 42, but the length needed grows like 4n, so no real sheet can be folded that far.
Checks run in the page
- The span read from the world transforms of the scene hierarchy is compared with
N s cos βat eleven fold fractions. - The sum of the hinge-to-hinge distances in the scene must equal L (paper is not stretched).
- The closed form for the folding length is compared with the term-by-term sum for n = 1..12, and the maximum fold count for the sheet is checked to satisfy the inequality on both sides.
Honest simplifications
- Strips are rigid and creases ideal; real creases have a finite radius and spring back (a crease behaves like a torsional spring), and card stock does not stay closed by itself.
- The thickness drawn on the desk is multiplied by the exaggeration slider so you can see it; every readout uses the true thickness.
- The halving formula assumes a long thin strip folded all in one direction. A real square sheet gives fewer folds, and friction is ignored.
- The fan is drawn with its valleys on the desk without contact physics.
What to try
- Drag the fold fraction and watch the span shrink as cos β against the dashed outline of the flat sheet.
- Raise the thickness to 1.5 mm and see how few folds the same sheet allows.
- Set 7 halving folds for copy paper and compare the length needed with an A4 sheet.
Loading model...
Loading Blender model...