3D Origami Paper Fold

A sheet folded into a fan: strip kinematics, how far the span shrinks, and why paper cannot be folded in half more than a few times.

Switch to 2D

Presets

Playback

Quick folds

Sheet

Folding

Camera

Layers

Quality

Model check

The science

What is modelled

A sheet of paper of length L is divided into N equal strips joined by hinges (the creases). Alternate creases are mountain and valley folds, so the sheet becomes an accordion or fan. Each strip is treated as a rigid panel and each crease as an ideal hinge. The sheet is anchored at its left end; the right end slides in as the fold fraction f grows.

Equations

  • Strip width s = L / N. Strips are tilted alternately by +β and −β from the horizontal, with β = f · βmax (βmax = 84°). The angle between neighbouring strips at a crease is π − 2β.
  • End-to-end span X = N s cos β, so the sheet shortens by 1 − cos β. The path length along the strips stays exactly N s = L.
  • Parallel straight creases have no interior vertex, so Maekawa's rule |M − V| = 2 for a flat-foldable vertex does not apply: mountains and valleys simply alternate.
  • Single-direction folding limit (Gallivan, 2002): folding a strip of thickness t in half n times needs a length L = (π t / 6)(2n + 4)(2n − 1). It is the sum of the half-circle bends of every layer at every fold, ΔLn = (π t / 2)(4n−1 + 2n−1).
  • Ideal doubling: after n halvings there are 2n layers and thickness 2n t. With t = 0.1 mm the thickness would pass the Earth-Moon distance (3.84×108 m) at n = 42, but the length needed grows like 4n, so no real sheet can be folded that far.

Checks run in the page

  • The span read from the world transforms of the scene hierarchy is compared with N s cos β at eleven fold fractions.
  • The sum of the hinge-to-hinge distances in the scene must equal L (paper is not stretched).
  • The closed form for the folding length is compared with the term-by-term sum for n = 1..12, and the maximum fold count for the sheet is checked to satisfy the inequality on both sides.

Honest simplifications

  • Strips are rigid and creases ideal; real creases have a finite radius and spring back (a crease behaves like a torsional spring), and card stock does not stay closed by itself.
  • The thickness drawn on the desk is multiplied by the exaggeration slider so you can see it; every readout uses the true thickness.
  • The halving formula assumes a long thin strip folded all in one direction. A real square sheet gives fewer folds, and friction is ignored.
  • The fan is drawn with its valleys on the desk without contact physics.

What to try

  • Drag the fold fraction and watch the span shrink as cos β against the dashed outline of the flat sheet.
  • Raise the thickness to 1.5 mm and see how few folds the same sheet allows.
  • Set 7 halving folds for copy paper and compare the length needed with an A4 sheet.
Loading model...
Loading Blender model...
Span vs fold fraction (formula and scene)
Length needed for n folds (log scale)
Stack thickness after n halvings (log scale)
Made with 🟠 Blender · Three.js