Balloon Inflation (3D bench)

Pump air into a latex balloon and watch the pressure rise, peak and fall: rubber elasticity, thinning walls and the burst limit.

Switch to 2D

Presets

Playback

Balloon material

Pump and valve

Camera

Layers

Quality

Model check

The science

Why a balloon is hardest to blow up at the start. A thin rubber sphere of radius r and wall thickness h carries a hoop stress sigma = dP r / (2 h) (Young-Laplace for a membrane). Rubber is incompressible, so stretching the radius by lambda = r/R0 thins the wall to h = h0 / lambda^2. Together with a rubber stress-strain law this gives a pressure that rises, peaks, then falls as the balloon grows.

Equations used by the page

  • Neo-Hookean membrane: dP = (2 mu h0 / R0) (1/lambda - 1/lambda^7). The maximum is at lambda = 7^(1/6) = 1.348; beyond it the pressure needed falls, which is why the second half of a breath feels easier.
  • Gent stiffening (chains run out of slack): the same expression times Jm / (Jm - (2 lambda^2 + lambda^-4 - 3)). It adds the steep rise just before a balloon bursts; the page sets Jm so the singularity lies 8% beyond the burst stretch.
  • Isothermal ideal gas: (P_atm + dP) V = n R T, V = 4/3 pi R0^3 lambda^3. For a given amount of air the page solves for lambda by bisection. Air-quantity control is stable (the product P V is monotonic); the "snap" people feel under pressure control is the falling branch of the curve.
  • Elastic energy of the membrane (neo-Hookean) E = 4 pi R0^2 h0 (mu/2) (2 lambda^2 + lambda^-4 - 3); virtual work dE/dV = dP is one of the in-page checks.
  • Pump: one stroke displaces V = pi r_barrel^2 x (barrel radius 4 cm). Release valve: orifice flow mdot = Cd A sqrt(2 rho dP), Cd = 0.62.

Honest simplifications

A real balloon starts as a flat folded sheet with very different geometry, is not a perfect sphere, shows hysteresis and the Mullins effect, and its neck and the first inflation take extra pressure; the model is a perfect sphere of initial radius R0 with no time dependence (no creep), isothermal air and a hard burst at the chosen stretch. Pump and hose losses are ignored. Values of mu and h0 are typical for party latex and are illustrative, not measurements of a specific product.

Checks run in the page

(1) The neo-Hookean pressure maximum found by a 200 000-point scan against the analytic 7^(1/6). (2) The gas law residual at the solved state. (3) Virtual work: the numerical derivative of the elastic energy with respect to volume against the pressure formula.

Loading model...
Loading Blender model...
Gauge pressure versus stretch (neo-Hookean dashed)
Pressure versus volume: equilibrium curve and your path
Wall thickness and hoop stress versus stretch
Made with 🟠 Blender · Three.js