EMBER / ENGINE LAB
REGENERATIVE STIRLING ENGINE · MODULE 06 / 07

Stirling engine power and efficiency design challenge

Tune a constrained engine design to meet power and efficiency targets without exceeding safe study limits.

DESIGN GATE · SHAFT OUTPUTTargets pending
Power target
120W
Efficiency target
35%
Your power
—W
Your efficiency
—
Peak pressure
—bar
Heat input rate
—W
Design score · 0 / 100

Shared engine operating parameters · scenario is saved across the family
The science · equations, assumptions and limits

Model basis. A closed ideal-gas Stirling cycle with isothermal compression at the cold-space temperature, constant-volume regenerative heating, isothermal expansion at the hot-space temperature, and constant-volume regenerative cooling. Air is represented by a constant specific gas constant R = 287 J kg⁻¹ K⁻¹ and γ = 1.4.

m = p̄ V̄ / (R T̄)   ·   Wᵢ = m R (Tₕ − T꜀) ln(Vmax / Vmin)
Qin = m R Tₕ ln(r) + (1 − ε)m cv(Tₕ − T꜀)
Qout = m R T꜀ ln(r) + (1 − ε)m cv(Tₕ − T꜀)
ηᵢ = Wᵢ / Qin   ·   Pbrake = max(0, ηmech Wᵢ f − 2π τf f)

The specified charge pressure is interpreted as the mean cycle pressure at arithmetic mean volume and temperature. The regenerator effectiveness ε recovers a fraction of the sensible heat exchanged on the two constant-volume legs. The engine is treated as one thermodynamic cycle per revolution for the equivalent friction-torque calculation.

Simplifications. No finite heat-transfer rate, gas-flow pressure drop, shuttle conduction, dead-volume temperature stratification, leakage, non-ideal gas effects, or crank-angle-dependent heat-transfer model is included. The constant-volume regenerator legs have zero boundary work. Brake output is an illustrative transmission-and-friction estimate, not a validated engine map.

Value status. Equations are textbook ideal-gas thermodynamics; default geometry and operating values are illustrative, not measured. The cutaway and sensor noise are scaled visualisations.

Illustrative design, not affiliated with any real institution or manufacturer.

EMBER educational laboratory · All calculations run locally in this browser. No external assets or network requests are required.
Made with 🤖 ChatGPT · Three.js