CAPILLARY-DRIVEN THERMAL TRANSPORT / 01
Loop heat pipe pressure budget
A passive thermal circuit, powered by a meniscus. Find the point where the wick can no longer pull liquid back to the evaporator.
LAB SERIES08ILLUSTRATIVE
DESIGN MODEL
DESIGN MODEL
LIVE SYSTEM VIEW
Thermal circuit
VaporLiquid
FLOW DIRECTION →
01 / EVAPORATOR + WICK02 / VAPOR TRANSPORT03 / CONDENSER04 / LIQUID RETURN
01 / PRESSURE BUDGET
PRESSURE · kPaWhere the pressure goes
Capillary headWickVapor lineLiquid line
02 / OPERATING ENVELOPE
RESERVE · kPaCapillary margin
Current operating pointLimit at 207 W
∑The scienceEquations, assumptions and model limits⌄
CAPILLARY PRESSURE
ΔPcap = 2σ cos θ / rpLATENT-HEAT FLOW
ṁ = Q / hfgWICK DARCY LOSS
ΔPw = μ Lw ṁ / (ρ K Aw)LINE FRICTION
ΔP = f (L / D) ρu² / 2Water properties are fixed at an illustrative 60 °C reference state. The model assumes steady saturated operation, a fixed contact angle, Darcy flow through the wick and single-phase friction in both lines. Gravity, vapor compressibility, local fittings and start-up transients are omitted. Treat the results as a teaching model, not a hardware rating.
✓Independent numerical checkGrid-bracketed heat limit agrees with the bisection solution.0.00 W
TAKE THE DATA
Explore beyond the screen
Export the pressure curve and the current operating point as a CSV file.