∿ THERMAL SYSTEMS LAB
Engineering / Heat transfer3D assembly laboratory
Capillary return · Two-phase transport

Capillary heat pipe thermal transport

Explore the internal assembly and watch vapour transport heat to the condenser while liquid returns through the porous wick.

TEXTBOOK MODEL
WATER · ~60 °C
Interactive heat pipe assemblyOrbit · named parts · animated flow
CUTAWAY ASSEMBLY · Y-UP WORLD
EvaporatorVapour coreWick return
Capillary pressure
—
ΔP cap · kPa
Liquid pressure drop
—
Darcy flow · kPa
Vapour pressure drop
—
Laminar core · Pa
Capillary heat limit
—
Q cap · W
Independent pressure-balance check—
The 3D assembly uses the same pressure-balance equations and defaults as the paired 2D analytical lab. Use the controls to reproduce a shared scenario.
The science · equations, assumptions and limitations

Pressure balance

ΔPcap = 2σ / rwickΔPl = μl Ll Q / (ρl hfg K Aw)ΔPv = 8 μv Lv Q / (π rv⁴ ρv hfg)ΔPg = ρl g Ll sin(α)Qcap = max[0, (ΔPcap + ΔPg)/(Rl + Rv)]

Model scope

Steady one-dimensional pressure balance; constant saturated-water properties near 60 °C; complete wetting (contact angle 0°); Darcy liquid flow and laminar vapour flow. The geometry is illustrative and scaled to make the internal components visible.

Boiling, sonic, entrainment, viscous and transient limits are not included. Real wick pore size and permeability are coupled by microstructure.

Independent check: the heat limit is recomputed from the closed-form pressure balance, separate from the model engine.

Illustrative design, not affiliated with any real institution or manufacturer. Values are textbook / illustrative / scaled, not a product rating.
Offline educational simulation · Scenario controls are shareable through the URL.
Made with 🤖 ChatGPT · Three.js