∿ THERMAL SYSTEMS LAB
Engineering / Heat transfer2D analytical laboratory
Capillary return · Two-phase transport

Capillary heat pipe thermal transport

Balance capillary pumping against liquid-wick and vapour-core pressure losses. Positive tilt places the evaporator below the condenser, helping liquid return.

TEXTBOOK MODEL
WATER · ~60 °C
Heat pipe cross-section · schematicNot to scale · flow animation
Evaporator → adiabatic section → condenser
Liquid / evaporationVapour flowWick return
Capillary pressure
—
ΔP cap · kPa
Liquid pressure drop
—
Darcy flow · kPa
Vapour pressure drop
—
Laminar core · Pa
Capillary heat limit
—
Q cap · W
Pressure margin vs heat inputZero = capillary limit
The operating point is compared with the pressure-balance boundary.
Pore size sensitivityQ cap vs pore radius
Smaller pores increase capillary pressure but can reduce permeability in real wicks.
The science · equations, assumptions and limitations

Pressure balance

ΔPcap = 2σ / rwickΔPl = μl Ll Q / (ρl hfg K Aw)ΔPv = 8 μv Lv Q / (π rv⁴ ρv hfg)ΔPg = ρl g Ll sin(α)Qcap = max[0, (ΔPcap + ΔPg)/(Rl + Rv)]

The operating point is feasible in this capillary-only model when ΔPcap + ΔPg − ΔPl − ΔPv ≥ 0.

What is simplified

Steady one-dimensional return flow; saturated water properties held constant near 60 °C; complete wetting (contact angle 0°); Darcy flow through a uniform wick; laminar Hagen–Poiseuille vapour flow; fixed effective flow areas and path lengths.

Real devices may instead be limited by boiling, sonic, entrainment, viscous, contact-angle, non-condensable-gas or transient thermal effects. Pore radius and permeability are independent controls here, although real wick microstructure couples them.

Independent check: the displayed heat limit is recalculated directly from the closed-form pressure balance.

Illustrative design, not affiliated with any real institution or manufacturer. Values are textbook / illustrative / scaled, not a product rating.
Offline educational simulation · Scenario controls are shareable through the URL.
Made with 🤖 ChatGPT