Presets
Playback
Entry and break-up
Shallow angles are natural decay; the break-up height decides how the pieces separate.
Model checks
The science
This 2D page
It runs the same orbit integrator, atmosphere, heating and ablation code and all five checks as the 3D page; only the drawing differs. The picture is a side view with altitude plotted against distance along the ground track (stretched vertically so the whole descent fits); the satellite and its seven pieces are Blender renders of the 3D page's model, drawn far larger than real size. The glow follows the stagnation heat flux of each piece.
What is modelled
A 220 kg satellite that has lost its orbit meets the atmosphere at 120 km with a speed of about 7.8 km/s. It slows down, heats up and, at a chosen altitude, comes apart into seven pieces with very different ballistic coefficients. The page follows each piece with its own trajectory, heating and ablation, so you can see which parts burn up and which could reach the ground, and how far apart they land.
Equations
- Motion in the orbital plane around a spherical, non-rotating Earth:
r″ = −μ r / r³ − (ρ Cd A / 2m) |v| v, withμ = 3.986004 × 1014 m³/s²and a fourth-order Runge-Kutta step of 0.05 s. - Air density: the 1976 US Standard Atmosphere layer formulas (temperature gradient and hydrostatic balance) up to 86 km, then a tabulated log-linear profile. The ballistic coefficient is
β = m / (Cd A). - Stagnation-point convective heating, Sutton-Graves:
q = 1.7415 × 10−4 √(ρ / Rn) v³W/m² for an Earth entry, with the nose radiusRnof each piece estimated from its area. - Lumped thermal model of a piece:
m c dT/dt = q A − ε σ T⁴ Asuntil the melting point, then material is lost atdm/dt = −(q A − ε σ Tm⁴ As) / Hfwith the heat of fusion Hf. A piece that falls below 1 % of its mass is counted as burned up. - Allen-Eggers solution for a ballistic entry in an exponential atmosphere: the peak deceleration is
vE² sinγ / (2 e H), independent of the mass, and the heating rate peaks atv = vE e−1/6of the entry speed.
Checks run in the page
- A circular 400 km orbit integrated for one analytic period closes on itself and conserves energy.
- Air density against nine published standard-atmosphere values.
- Peak deceleration of an ideal ballistic entry against the closed form.
- The speed at peak heating against exp(−1/6).
- Orbital energy lost by a body against the integrated drag work.
Honest simplifications
- The material, mass and area of the seven pieces are illustrative round numbers for a small satellite, not a real spacecraft; the break-up altitude is a slider, not computed from structural loads, and every piece is released with the speed of the whole.
- Each piece is treated as a tumbling body with a constant drag coefficient of 1 and an average projected area; there is no lift, no real shape, no shock-layer radiation, no catalytic or blowing effects and no spreading of the heat inside the piece (it is one temperature). Stagnation heating is applied to the whole projected area, which is deliberately conservative for thin panels and generous for the dense tank. Real demise studies use thousands of such fragments and a coupled structural code, so the survival results here show tendencies, not predictions.
- The Earth does not rotate and the atmosphere has no wind or day-night or solar-cycle variation above 86 km; the orbit plane is fixed; there is no J2 or third-body force. The Earth globe and the glowing trails are drawn for appearance, and the pieces are drawn 20 times larger than real.
- Atmospheric density at 120 km can vary by a factor of two with solar activity; the profile here is one typical case.
What to try
- Choose Early break-up at 95 km: the light solar panels burn higher up while the dense pieces fly on.
- Choose Controlled steep de-orbit: the debris lands in a short footprint (read it under the picture).
- Choose Stays in one piece and compare the peak heat flux with the break-up case in the second graph.
- Pick the Titanium tank in Camera follows: dense and compact, it keeps nearly all of its mass.