Rayleigh limit. A conducting liquid sphere of radius r and surface tension γ becomes unstable to a quadrupole (l = 2) deformation when the electrostatic pressure beats surface tension: qₒ = 8π√(ε₀γr³) (Lord Rayleigh, 1882). Equivalently the Coulomb energy q²/(8πε₀r) reaches twice the surface energy 4πr²γ.
Charge-to-mass ratio. With m = (4/3)πr³ρ a droplet carrying a fraction f of qₒ has q/m ∝ f / (ρ r³⁄²): small droplets are strongly charged per unit mass.
Exhaust speed. A droplet accelerated through a potential difference V gains ½mv² = qV, so v = √(2(q/m)V) and Isp = v/g₀. Thrust follows from the mass flow set by the current, ṁ = I/(q/m) and F = ṁv = I√(2V/(q/m)). Beam power ½ṁv² = IV, so F/P = √(2/((q/m)V)): higher exhaust speed costs thrust per watt.
Why this matters. Colloid / electrospray thrusters of this kind give micro-newton thrust with very fine control, useful for precision pointing and formation flying of small satellites. Real devices emit a mix of ions and droplets and have beam divergence and energy spread.
Simplifications. Ideal monodisperse spherical droplets (real ones are polydisperse), uniform field, 100 % beam transmission, no space charge, no droplet fragmentation or evaporation; the continuum surface-tension picture fails below a few nm (the 2 nm preset is an extrapolation). Surface tension 0.03 to 0.06 N/m and density about 1400 kg/m³ are typical ionic-liquid values, not data for one product. The emitter count and plate geometry are schematic.
Checks. The closed-form Rayleigh charge is recovered by bisection on the l = 2 capillary-mode dispersion relation ω² = l(l−1)/(ρr³)[(l+2)γ − q²/(16π²ε₀r³)]; a water droplet of 1 µm gives the textbook ~2×10−14 C; a leapfrog integration of Newton's law across a 0.5 mm gap reproduces √(2qV/m); and the beam power equals the electrical power.
The thruster head (emitter array, electrodes, standoffs, housing) was modelled and baked in Blender; physics and rendering run in Three.js r160.