Every frame the satellites move along their orbits and the code rebuilds a graph: an edge joins two satellites only if they're within the ISL range slider and the straight line between them doesn't pass through the Earth. A ground station links to any satellite it can see overhead the same way. Dijkstra's algorithm then finds the fastest path across that graph, weighting each edge by real propagation delay (distance ÷ speed of light).
edge weight = distance / c
mesh: sat↔sat direct links allowed
bent-pipe: sat can only relay straight down —
every hop must bounce through a ground
gateway and a slower fiber backhaul leg
- ISL mesh (cyan) — the packet hops satellite-to-satellite across the sky, the way modern laser inter-satellite links route traffic without ever touching the ground mid-flight.
- Bent-pipe (magenta) — the classic transponder architecture: a satellite can only relay a signal straight back down, so the packet must detour through a chain of ground gateways connected by terrestrial fiber, adding hops and fiber delay.
- Satellites per plane / ISL range — denser shells and longer-range links create more possible mesh edges, usually shortening the ISL path; the bent-pipe path barely changes since it depends on gateway geography, not satellite density.
- If no path exists at a given moment (e.g. too few satellites are visible), the stat reads "no link" until the geometry opens back up.
Real-world relevance: this is exactly why LEO mega-constellations (Starlink, and similar systems) are racing to add laser inter-satellite links — mesh routing removes the double up/down hop and gateway detour of older bent-pipe satellite systems, cutting latency especially over oceans with no nearby ground station.