In a system with two bodies orbiting their common barycentre, there are exactly five positions where a massless third body can remain stationary in a rotating reference frame.
01 / GOVERNING PHYSICS
Rotating-frame dynamics
Positions and time are normalized so that the primary separation, total gravitational parameter, and angular speed equal one. The probe obeys Newtonian gravity with Coriolis and centrifugal terms:
ẍ − 2ẏ = ∂Ω/∂x
ÿ + 2ẋ = ∂Ω/∂y
Ω = (x² + y²)/2 + (1−μ)/r₁ + μ/r₂. Orbits are integrated numerically with fourth-order Runge–Kutta.
02 / CONSERVATION LAW
The Jacobi veil
The Jacobi constant C = 2Ω − (vₓ²+vᵧ²) is conserved along ideal trajectories. At a fixed C, regions with 2Ω < C are unreachable because they would require negative squared speed.
Change the probe’s initial speed by dragging a longer launch arrow. Its Jacobi constant changes and forbidden passages open or close. Bright cyan contours mark the zero-velocity boundary.
03 / THE STABILITY SWITCH
Routh’s critical mass ratio
L4 and L5 are linearly stable only if μ < (1−√(23/27))/2 ≈ 0.03852. Past this threshold, small disturbances tend to grow. Change the mass ratio to discover this transition.
The nearby shadow probe starts only 0.0001 units away. Its measured separation illustrates divergence, but short-time separation alone is not a Lyapunov exponent.
04 / HOW TO EXPLORE
Launch, perturb, compare
Select Launch a gravity probe, then press and drag on the orbital plane. The arrow’s length and direction set the initial velocity in the rotating frame. Release to launch. Short taps deploy zero-velocity probes.
Try Jupiter and Earth–Moon mass ratios, then cross the stability threshold. Use Co-rotating / Inertial to compare coordinate systems. Drag to orbit your camera, scroll/pinch to zoom, and select any Lagrange point.