Model. The panel (L = 6 m, 12 kg, N = 21 nodes, spacing dx = L/20) is a damped wave chain: w″i = K (wi-1 − 2wi + wi+1) − C w′i + grip terms, with free (Neumann) ends. K = c²/dx² = 4 s-2 gives the same bending-wave speed c = √K·dx = 0.6 m/s as the 2D twin (which uses 41 nodes and K = 16); C = 1.3 s-1 is material damping. The normal modes are wn = cos(nπi/20) with ωn = 2√K sin(nπ/40), which the check below verifies. A grip is a spring-damper pulling the node to its commanded trajectory; the coordinated mode adds active relative-velocity cancellation. Grip force is node mass × node acceleration; energy is ½m∑(v² + KΔw²).
Simplifications. A 1-D wave chain stands in for real beam bending (which is dispersive, ω ~ k²); the deflection scale (1 unit = 25 cm), mass and gains are illustrative, not a specific spacecraft; the 3D arms are drawn kinematically. The scene panel is drawn 4.2 m long for the view while the physics uses L = 6 m. Educational model only.
A long flexible payload (solar array / reflector panel) has no rigid support of its own in microgravity — every reposition injects a disturbance that the structure must ring out on its own. One arm gripping a single point lets the free end flex and ring after each move. Two arms gripping both ends can either fight each other — pulling out of sync and pumping more energy into the panel's bending — or actively coordinate, each arm sensing the other's motion and adding a damping force proportional to their relative velocity, cancelling the shared structure's vibration far faster than either arm alone.
- Single arm — one grip, one free end; moderate vibration that lingers after the move.
- Uncoordinated two-arm — both ends gripped but out of phase; conflicting forces amplify the bending.
- Coordinated two-arm — both ends gripped in sync, plus active relative-velocity damping; fast, clean settle.