Presets
Playback
Parameters
Camera
Layers
Quality
Model check
The science
Glass flows like a very thick liquid. Its viscosity falls by more than ten orders of magnitude between the annealing point (about 540 C, 1012 Pa s) and the furnace (about 1200 C, 102 Pa s). The model uses the Vogel-Fulcher-Tammann law, log10 η = A + B/(T - T0), with A = -2.5, B = 4500 and T0 = 250 C for soda-lime glass. A blower works between the working point (104 Pa s, about 1000 C) and the softening point (106.6 Pa s, about 725 C); below that the piece is too stiff and goes back into the glory hole.
Blowing a bubble. Treat the gather as an incompressible viscous shell with inner radius a and outer radius b, so b3 - a3 = c is the (constant) glass volume. Stokes flow gives the inner pressure p = 4η å (b3 - a3)/(a2 b3), hence å = p a b3/(4 η c). At constant η and p this has the exact solution (a/b)3 = (a0/b0)3 exp(3pt/4η): the wall thins exponentially and the bubble bursts when it gets thinner than a fraction of a millimetre.
Cooling. The glass loses heat by radiation and convection, m c dT/dt = - A [ε σ (T4 - Ta4) + h (T - Ta)], so cooling speeds up as the bubble grows (more area per kilogram) and the viscosity rises: the blower must reheat. In the glory hole the glass absorbs heat from the walls at about 400 W/m2K.
Sag and rotation. A stationary hot bubble elongates under gravity at about ρ g b/(6η); rotating the pipe averages this out, which is why glassblowers keep turning it.
Simplifications. One lumped temperature (a thick gather is really hotter inside than at its surface), Newtonian viscosity, surface tension and the air in the pipe ignored (they matter little: 4γ/a is about 100 Pa against kilopascals of breath), constant breath pressure, a fixed burst thickness of 0.4 mm, sag shown qualitatively. Colours use a blackbody approximation.