Loading the construction site…
🏗 Tower crane mechanics
Overturning moment (front edge)—
Restoring moment (front edge)—
Front stability factor—
Rear stability factor—
Max safe load at this reach—
Min load (rear tip limit)—
The science

Model. A tower crane is a lever balanced on its base. Stability is a moment balance about each tipping edge of the base (here the outer legs at x = ±1.7 m). Tipping toward the jib is about the front edge: overturning Mo = mLg(d − b) against restoring Mr = mSg b + mCg(a + b), where d is the trolley reach, b = 1.7 m the half base, a = 6 m the counterweight arm, mS the crane's own mass (tower, jibs, ballast base, taken as 40 t at the axis) and mC the counterweight. Tipping backward is about the rear edge: Mo = mCg(a − b) against Mr = mSg b + mLg(d + b) — an unloaded crane with a big counterweight can fall backwards, which is why real cranes have a rule for the order of erecting and dismantling counterweights.

Stability factor = Mr/Mo; the crane tips when it drops below 1. The load chart value mL,max = (mSb + mC(a+b))/(d−b) falls with reach, exactly like the rated-capacity chart on a real crane.

Honest simplifications. Rigid body, level ground, perfectly rigid support, no wind, no dynamic swing or braking loads, no structural strength (members do not break), no safety factors beyond the displayed one (real standards require margins and test loads). The masses of tower, jibs and base are lumped into one illustrative figure. The toppling animation is an illustrative rotation about the edge, stopped by ground contact of the jib tip or load; the load is released as the crane goes over and falls freely; it is not a rigid-body impact simulation. Educational model, not for crane planning.

Independent checks (run on load):

running…
—
Drag to orbit · wheel to zoom · sliders change load, reach and counterweight
Made with 🟠 Blender · Three.js