Plant Root Clinostat: Averaged Gravity, Root Angle and Statolith Offset (2D)

Three plates side by side: a static control root turns towards gravity, a clinostat root rotates and grows straight, and a microgravity root does not turn at all.

Switch to 3D
Controls

Presets

Parameters

Model checks

The science

Why a clinostat. Plants sense gravity with starch-filled statoliths (amyloplasts) that sediment inside the root-cap columella cells. Spaceflight is rare and costly, so labs rotate plants slowly on a clinostat: if the sample turns faster than the statoliths can settle but slower than the tissue can bend, the gravity vector averages out and the root behaves as if the net gravity were small. This page tests that idea with a model and lets you break it.

Model. In the rotating frame the in-plane gravity is g (cos wt, -sin wt) cos(tilt); the axial part g sin(tilt) is constant and cannot bend a planar root. A second axis (2-D clinostat) turns the frame again at 1.618 w so that the vector covers a sphere. Statolith displacement X obeys dX/dt = vs g - X/τ with the Stokes speed vs = 2a²(ρs - ρc)g / (9η) (a = 2.5 µm, Δρ = 400 kg/m³, effective cytoplasm viscosity η = 0.3 Pa s, resettling time τ = 120 s). The root axis angle follows the sine law dψ/dt = keff tanh(|X|/Xh) sin(angle(X) - ψ), where keff = k r0/r because the same growth difference across a thinner root gives a larger curvature. For static gravity the exact solution is tan(θ/2) = tan(θ0/2) e-Kt.

What the checks compare. (1) The mean gravity over whole turns against its closed form (0, 0, -sin tilt) for the 1-D clinostat, and against zero for the 2-D one. (2) The terminal speed of a numerically integrated force balance (weight, buoyancy, Stokes drag, added mass) against the Stokes formula, with a Reynolds number check. (3) The simulated statolith offset in a rotating field against the first-order filter amplitude vsτ cos(tilt)/√(1 + (wτ)²). (4) The sine-law ODE (RK4) against its exact tan-solution and, for small angles, against the exponential. (5) The full model on a static plate against the exact solution with K = keff tanh(vsτ/Xh), allowing for the statolith build-up lag.

Simplifications and honesty. A clinostat is an imperfect microgravity analogue: it removes the time-averaged direction, not the stimulus. Real roots also respond to the fast rotating statolith motion, to centrifugal and shear effects, and a 1-D clinostat leaves the axial component. The viscosity, resettling time, saturation scale Xh and gains are illustrative round numbers (reported values span a wide range, and the auxin-transport step is folded into k). Roots are planar and grow at a constant rate. Quantities are for teaching, not for planning an experiment. The on-screen plate spin is capped at a few radians per second; the physics uses the true rotation rate.

-
-
Made with 🟠 Blender