Mars Atmosphere Race

2D companion of the 3D Mars atmosphere lab: a thicker atmosphere also loses more, so where does the pressure settle?

Switch to 3D

Presets

Playback

Apparatus

Model checks

The science

What is modelled

Air is added at a steady rate while the solar wind strips it away at a rate proportional to how much there is. The pressure therefore climbs towards a steady value set by the balance of the two. A magnetic shield at the L1 point cuts the stripping rate, which raises the steady value and speeds the approach.

Equations

  • Pressure balance dP/dt = a − P/τ, exact solution P(t) = aτ + (P0 − aτ) e−t/τ, steady value P* = a τ.
  • Shield: the loss rate is cut by the fraction s from the switch-on year, so τ becomes τ / (1 − s).
  • Atmosphere weight m = P · 4 π R² / g, with R = 3389.5 km and g = 3.71 m/s².

Checks run in the page

  • Step integration against the piecewise exact solution.
  • Time to reach the target against the closed form -τ ln((P* − target)/(P* − P0)).
  • Added minus stripped equals the pressure change, and 6.1 mbar weighs about 2.5e16 kg.

Honest simplifications

Real stripping depends on solar activity, the ionosphere and the atmosphere composition and is not simply proportional to the pressure; the stripping times here are illustrative, the shield effect is a flat percentage, and nothing is said about where the added air would come from or the greenhouse effect.

What to try
  • Press Slow addition, no shield: the steady pressure may sit below the target forever.
  • Press Shield at year 100 and see the steady pressure and the reach time change.
  • Press Shield too late: the shield cannot save a target already lost.
Surface pressure over centuries
Addition and stripping rates
Cumulative added and stripped
Steady pressure against addition rate