Interstellar Link Budget

2D companion of the 3D probe link lab: how far can a 23-watt radio talk before the noise floor wins?

Switch to 3D

Presets

Playback

Apparatus

Model checks

The science

What is modelled

The probe radiates a narrow beam from a dish; the ground dish collects a tiny fraction. The signal is only useful if the energy per bit beats the thermal noise by the margin the error-correcting code needs, so a farther probe must send fewer bits per second.

Equations

  • Friis Pr = Pt Gt Gr (λ / 4πd)² with dish gain G = ε (πD/λ)², ε = 0.6.
  • Noise density N0 = k Ts; bit energy ratio Eb/N0 = Pr / (R N0).
  • Largest rate Rmax = Pr / (N0 (Eb/N0)req); Shannon capacity C = Pr/(N0 ln 2).

Checks run in the page

  • Friis product form against the decibel budget.
  • Inverse square: 6.02 dB per doubling and 20 dB per decade.
  • Maximum rate gives zero margin and stays below Shannon capacity; light time equals 499 s per AU.

Honest simplifications

The dish efficiency is a flat 0.6, there is no pointing loss, atmosphere, rain or interplanetary plasma, the coding is summarised by one required Eb/N0, and Earth and the probe are static. The numbers show orders of magnitude, not a mission design.

What to try
  • Press Fixed rate goes silent and watch the margin go negative; then switch Auto-adapt on.
  • Press Small ground dish: how much rate is lost when the ground dish area drops?
  • Press Ka-band upgrade and compare with the X-band case.
Received power against distance
Maximum and used data rate
Link margin against distance
One-way light time