Wind Chime Porch Lab (3D)

A Blender-built porch wind chime: a sail-driven clapper is blown into hung metal tubes whose pitch, overtones and ring-down time come from the beam equation and the material.

Switch to 2D

Presets

Playback

Tubes

Material, scale and tube size set the pitch of every tube.

Wind

Mean speed, turbulence and direction.

Clapper

Mass, string, sail and where the clapper hits.

Speed and sound

Sound uses a modal synthesis of the tube modes.

Camera

Layers

Quality

Model checks

The science

What this page shows

This is the 3D twin: the same tube physics module as the 2D page, shown as a porch scene modelled and texture-baked in Blender. Each tube swings on its string when struck and glows in proportion to its modal level in dB, so you can watch loud strikes fade at different rates for different metals.

A wind chime is a set of hollow metal tubes hung at their vibration nodes and struck by a clapper that a sail pushes around in the wind. This page models all three stages: gust, clapper and strike; then the tube's own vibration modes; then the decay of the sound for different materials. The tube physics lives in one module that the 3D twin shares, so both pages give the same frequencies and the same ring-down times.

Transverse vibration of a free tube

A thin tube vibrating in bending is an Euler-Bernoulli beam, EI ∂&sup4;w/∂x&sup4; + ρA ∂²w/∂t² = 0. With both ends free the modes satisfy cos(βL) cosh(βL) = 1, whose roots are βL = 4.730, 7.853, 10.996, 14.137. The frequencies are fn = (βnL)² / (2πL²) · √(E/ρ) · rg with the radius of gyration rg = √(D² + d²)/4. Overtone ratios are 1 : 2.76 : 5.40 : 8.93, not whole numbers, which is why a chime sounds bell-like rather than like a string. Frequency scales as 1/L², so a tube twice as short is two octaves higher.

Why tubes hang at 22 % of the length

The first mode has nodes at 0.2242 L and 0.7758 L. A tube hung through a node can ring freely because the support does not move the tube there. The page marks these nodes, and the strike position changes how much each mode is excited: a mode is excited in proportion to its shape φn at the strike point. Striking at a node of mode 1 silences the fundamental.

Decay and material

Each mode decays as e−ζωt with ζ = η/2 (η = material loss factor), so the 60 dB decay time is T60 = ln(1000) / (ζω). Low-loss metals (aluminium, steel, titanium) ring for many seconds; brass and copper are more damped; bamboo is a dull knock. Loss factors here are illustrative orders of magnitude; real values depend on alloy, temper and how the tube is hung.

The clapper and the wind

The clapper is a small bob on a string with a sail, a small-angle pendulum x'' = −(g/Lp) x − c x' + ½ρair Cd As |U − v|(U − v)/m, driven by wind U = mean + turbulent gusts (an Ornstein-Uhlenbeck process, 1.6 s correlation time). When the bob reaches a tube it exchanges momentum: normal speed reverses with restitution e, and the impulse J = (1 + e) vn meff goes into the tube modes with velocity amplitude J φn(xs)/mtube.

Honest simplifications

Thin-tube beam theory (it ignores shear and rotary inertia, so the upper overtones are a few percent high for stubby tubes); small-angle pendulum; the tube is treated as a free body with the support not damping it; no air radiation model (loudness is a relative index); loss factors are typical orders of magnitude. The sound is a modal synthesis, not a recording.

What is drawn and what is physics

Tube lengths, hang points (the first node, 0.2242 L from the top), strike positions and swing impulses come straight from the module. The clapper height sets the strike position on each tube separately: with the hang points aligned, a tube of length L is struck at x/L = 0.224 + h/L, where h is the strike height below the hang point; at h = 0 every tube is struck at its node and the fundamental is muted. The tube wall is drawn at 6 % of the diameter regardless of the wall-thickness slider (the slider changes the physics).

What to try

  • Choose Steel, then Copper, and watch the glow of a struck tube fade at very different speeds.
  • Set the strike height to 0 cm: every tube is hit at its node and the fundamental nearly vanishes.
  • Raise the wind to a gale: strike rate rises but loudness per strike saturates.
Loading model...
Loading Blender model...
Selected tube: mode frequencies and strike excitation
Ring-down after the last strike (dB)
Wind, clapper speed and strikes (last 40 s)
Frequencies of every tube (f1, f2, f3)
Made with 🟠 Blender · Three.js