The room is a lumped two-node model: the clay stove (S) and the room air with furnishings (R).
Cs dTs/dt = Qf - Gsr (Ts - Tr)
Cr dTr/dt = Gsr (Ts - Tr) + Qo - G (Tr - Tout)
Qf = eta * mdot * LHV, G = UA + rho cp V n / 3600
At steady state Tr = Tout + (Qf + Qo) / G. For constant inputs the 2x2 linear system has a closed-form solution from its two real eigenvalues; the page integrates the equations with RK4 and compares with that closed form, and also reports the energy-balance residual.
- Typical, illustrative values: V = 143 m3, UA = 145 W/K (walls 1.1, thatch 0.35, earth floor 0.6 W/m2K), eta = 0.60, LHV = 14.4 MJ/kg, 80 W per seated person, 0.8 air changes per hour (+6 with the door open). They are not measurements of a real kurin.
- Simplifications: two lumped nodes, no radiation exchange between surfaces, no moisture, constant stove efficiency, uniform air temperature, no wind.
- Heat-bearing masonry stoves behave as thermal batteries; this model captures only the first-order effect of their mass.
- Reconstruction: source-inspired interpretation of the New Sich era, not an exact archaeological plan. 3D assets were modelled in Blender.