Carve: the knife tip follows the pointer; the blank is cut down to the tip radius, but each stroke removes at most the pass depth below the surface it started on. Smooth: sands the profile.
A lathe makes round shapes only. The swan is in the 3D version, where the knife can cut any shape.
running...
The science
Volume by integration. A turned soap piece is a solid of revolution: the profile r(z) is spun about the lathe axis. Slicing it into thin discs gives
V = π ∫ r(z)2 dz Across(z) = π r(z)2 Aside = 2 ∫ r(z) dz
The profile is piecewise linear on 400 intervals, so each interval is integrated exactly: ΔV = π Δz (r12 + r1r2 + r22)/3 (a frustum). The same volume is also computed by the shell method, V = 2π ∫ y · ℓ(y) dy, where ℓ(y) is the length of blank thicker than y — a different quadrature that must agree.
Density and removed mass. m = ρV with ρ about 1.0–1.1 g/cm3 for bar soap. With uniform density the mass removed is mremoved = ρ(V0 − V), and every removed cubic centimetre is handed to the shavings, so the books balance.
Hardness and force. Mohs numbers are an ordinal ranking, so the model uses an illustrative cutting stress σ(H) = 0.15 MPa × 1.7H−1. Cutting a groove of width w and depth d needs F = σ w d; with a hand-force limit Fmax the achievable pass depth is d = min(dset, Fmax/(σ w)). Real soap is viscoelastic and rate-dependent; this is the simplest consistent description, not a measured law.
Shavings carry their exact share of the removed volume and fall with y″ = −g − k y′ (g = 981 cm/s2), bounce a little and rest in the dish. The drawn curl size is only a visual proxy for the volume.
Checks run in the page. (1) fresh-blank volume against πR2L; (2) a carved sphere against 4πR3/3; (3) disk method against shell method for the vase and for your current profile; (4) the mass ledger against the shavings; (5) the shaving integrator against free fall t = √(2h/g).
Honest simplifications. The soap is uniform and isotropic; the knife removes material instantly, with no plastic flow, heat or real chip formation; the lathe speed only animates the surface. Background and stand: Blender 5.2 render (a side-on orthographic view); the soap, knife and shavings are drawn live.