Presets
Playback
Bubbles
Camera
Layers
Quality
Model check
The science
What is modelled
Bubbles drift through the air, drain and thin, show interference colours, and pop. Each bubble is a spherical soap film with two surfaces. Its film thins with time, it falls or rises according to the gas inside, and when the film is torn (by a touch, or when it gets thinner than about 30 nm) a hole opens and races around the sphere at the Taylor-Culick speed.
Equations
- Pressure: a bubble with two surfaces has an excess pressure
ΔP = 4 σ / R(σ = 25 mN/m for soapy water): 5 Pa for a 2 cm bubble. - Colours: light reflected from the front and back of the film interferes. For a free film with the half-wave phase jump at the first surface,
R(λ) = 2 r² (1 - cos(4 π n h cosθ / λ))withr = (1 - n)/(1 + n), n = 1.33. The first green maximum is ath = λ/4n= 103 nm. Thinner than about 20 nm the film reflects almost nothing (the black film just before rupture). The colours here sum seven wavelengths into RGB, a coarse approximation of true colour matching. - Thinning:
h(t) = h0 / (1 + t/τ). The film is thicker at the bottom, so the colour bands run horizontally. This is an empirical form, because real drainage depends on the surfactant, humidity and evaporation. - Flight: net weight = film mass + gas inside - displaced air, against drag
½ ρa Cd(Re) π R² v²with the sphere drag law. A 2 cm air bubble falls at about 0.28 m/s; warm breath slows it; helium makes it rise. - Rupture: the rim that collects the film moves at
v = √(2 σ / ρ h)(Taylor 1959, Culick 1960): 10 m/s for a 500 nm film. The hole angle grows asv t / R; the pop lastsπ R / v, a few milliseconds, so the page slows time automatically.
Checks run in this page
- The excess pressure from differentiating the film energy,
dE/dV, equals4σ/R. - The rim momentum balance
d(Mv)/dt = 2σ, integrated, settles on the Taylor-Culick speed and puts half of the released surface energy into kinetic energy. - The reflectance maximum at 550 nm sits at
λ/4n; a 10 nm film is almost black. - A time-stepped 2 cm bubble reaches the terminal speed given by the force balance; helium rises.
Honest simplifications
- The bubble stays a sphere (no oscillations or wobble), the film thickness varies by a fixed pattern from top to bottom, and there is no marginal regeneration, Marangoni flow or evaporation model beyond the single time constant.
- The rim breaks into a spray of 30 drawn droplets; real pops produce a huge number of micro-droplets of tens of micrometres. The popping sound is a decorative noise burst whose pitch falls with bubble size, not a computed acoustic field.
- Wind is a smooth gust field, not a flow solution.
Loading model...
Loading Blender model...