Prism Dispersion Bench in 3D: Sellmeier Glass, Minimum Deviation and Abbe Number

White light through a glass prism on a turntable: the same Sellmeier and Snell ray tracer as the 2D page, with each colour traced separately to the screen.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What is modelled

A white beam from a slit passes through a glass prism on a turntable and lands on a screen. Each wavelength from 400 to 700 nm in 5 nm steps is traced separately through the prism with the vector form of Snell's law, so the fan of colours, the angles and the screen spread come from the same equations as the 2D page "Prism Light". The bench, lamp, turntable, prism and screen are a Blender-built rig; the prism mesh is scaled by the page to the chosen apex angle.

Equations

  • Snell's law at each face: n1 sin θ1 = n2 sin θ2, with total internal reflection when the sine would exceed 1.
  • Dispersion by the Sellmeier equation n²(λ) = 1 + Σ Biλ²/(λ² − Ci) with the published coefficients of Schott BK7, SF11 and fused silica. Blue light has the larger n and bends more.
  • Deviation of a ray through a prism of apex A: δ = θ1 + θ4 − A; minimum deviation when the path is symmetric, n = sin((A + δmin)/2) / sin(A/2).
  • Abbe number V = (nd − 1)/(nF − nC): how strongly a glass disperses.

Checks run in the page

  • Sellmeier d-line index and Abbe number of BK7 and SF11 against the catalogue values.
  • The polygon ray tracer against the closed-form deviation for five glass, angle and wavelength cases.
  • A brute-force scan of the incidence angle against the closed-form minimum deviation and angle.
  • The Blender prism mesh, scaled by the page, has the apex angle and face length that the model uses.

Honest simplifications

  • One thin chief ray per wavelength in the horizontal plane (a 2D section of an extruded prism); no beam width, no diffraction at the slit, no Fresnel losses, absorption or secondary internal reflections except full total internal reflection.
  • The colour spread after the prism is drawn exaggerated (slider, default 8x, set 1x for true scale) by rotating each colour's exit direction about the 550 nm ray; the readout "true spread" is computed without the exaggeration. The screen colours are an sRGB approximation of each wavelength, not true spectral colour, and the beam is drawn as additive ribbons for visibility. The lamp slides sideways to keep the beam on the middle of the first face as the prism turns.
  • The glass in the picture is a physically based transmission material set to the 550 nm index; it is not a refraction renderer, only the traced rays carry the optics. One bench unit is 2.5 cm.

What to try

  • Press "Minimum deviation" and watch the spread of colours at the screen become the smallest.
  • Switch from BK7 to SF11: the same prism spreads the colours about twice as far (Abbe number 26 against 64).
  • Raise the apex angle or the incidence angle until the blue rays are totally internally reflected inside the glass.
Loading model...
Loading Blender model...
Deviation vs wavelength
Deviation vs angle of incidence
Refractive index n(wavelength)
Made with 🟠 Blender · Three.js