MYSIMULATOR/DEEP SKY LAB
INTERACTIVE OBSERVATORY·EXP. 322248
R160 / WEBGL2
LIVE RELATIVISTIC SIGNALBINARY NEUTRON STAR / ORBITAL DECAY
NS–A 1.35 M☉
NS–B 1.35 M☉
DRAG TO ORBIT · SCROLL / PINCH TO ZOOM · TAP A STAR
INSPIRAL IN PROGRESS
NOT TO SCALE ⓘStar sizes, wavefronts, and orbital animation are enlarged or slowed for clarity. Numerical measurements use physical units.
SIMULATION TIME00:00.0
UNTIL CONTACT00:37.7
STRAIN CHANNEL H(t) / synthetic noise
VISUALIZED CARRIER · 12 s WINDOW

When spacetime becomes a signal.

Orbiting neutron stars lose energy through gravitational radiation. In the leading-order, circular-orbit approximation, their gravitational-wave frequency rises according to the chirp mass and remaining time before coalescence.

df/dt = (96/5) π8/3 (Gℳ/c³)5/3 f11/3
Chirp mass ℳ

ℳ = (m₁m₂)3/5 / (m₁+m₂)1/5. It governs how quickly the frequency accelerates.

Measured strain

h(t) = F₊h₊(t) + F×h×(t). The antenna factors depend on the source direction, wave polarization, and detector orientation.

Distance law

The strain amplitude is inversely proportional to luminosity distance; double the distance to roughly halve the signal.

End of validity

The model stops when two 12 km surfaces touch. It omits post-Newtonian corrections, tides, spins, mergers, and ringdown.

TRY THESE EXPERIMENTS
  1. Double the distance and watch the strain decrease by half.
  2. Increase either mass and see a faster chirp from the new chirp mass.
  3. Set inclination to 90° and search for detector blind spots.
  4. Rotate the detector: source frequency stays fixed but measured amplitude changes.

Visualization caveat: Stellar radii and emitted wavefronts are dramatically enlarged and orbital motion is slowed to show detail. Wavefront rings illustrate radiation, not literal spacetime surfaces. Graph carrier frequency is downshifted for readability; the numerical Hz and strain values follow physical formulas. White sample noise is illustrative and is not an astrophysical detector power-spectral-density model.

Become the observer.

01 / Navigate. Drag the 3D view to orbit the stars. Scroll or pinch to zoom. Select cinematic, face-on, edge-on, or detector camera positions.

02 / Experiment. Change masses and starting frequency to restart the physical inspiral. Distance, inclination, sky angle, polarization, and noise update instantly.

03 / Find the signal. Drag the detector compass (or its slider). Seek Maximum and Seek Minimum scan the actual antenna response; the detector RMS strain will change.

04 / Observe. Watch the frequency climb and the time remaining fall. Pause, resume, or change the time rate. Select a star for details.

05 / Listen. The ♪ button plays a synthetic, frequency-downshifted audible chirp when supported. Sound requires a tap.

Made with 🤖 ChatGPT · Three.js