Instead of a bulky magnetized ferrite, this isolator engineers nonreciprocity from pure interference between two coupling paths connecting the qubit port to the amplifier port: a direct coherent coupling gc, and an indirect dissipative coupling gd routed through an engineered lossy auxiliary mode. No magnetic bias field is involved at all.
r = g_d / g_c, φ = coupling phase difference
Forward: A_fwd = √(r² + 1 + 2r·sinφ) / (1+r)
Reverse: A_rev = √(r² + 1 - 2r·sinφ) / (1+r)
Isolation(dB) = -20·log₁₀ A_rev (capped ~45 dB)
At the sweet spot r = 1 and φ = 90° the two reverse-path amplitudes cancel exactly (A_rev → 0) while the two forward-path amplitudes add constructively (A_fwd → 1): the signal still reaches the amplifier essentially undiminished, but backward-traveling amplifier noise is destroyed by destructive interference right at the auxiliary mode before it ever reaches the qubit.
- Isolator ON/OFF — off removes the dissipative path entirely (r forced to 0): only the plain coherent link remains, which is fully reciprocal — noise passes back exactly as easily as signal passes forward.
- Coupling ratio r — the two paths must be power-matched (r = 1) for full cancellation.
- Interference phase φ — must sit at the 90° quadrature point; drifting away reopens a reverse leakage channel.
- Amplifier noise rate — how often the amplifier throws a reflected/added noise photon at the isolator.
Real-world relevance: this reservoir-engineered, magnet-free approach (after Metelmann & Clerk) is used in real superconducting-qubit labs to build isolators and directional amplifiers that fit on-chip, where a centimeter-scale ferrite circulator simply won't fit.