dc SQUID Magnetometer: Flux-Periodic Critical Current and Voltage Response

A dc SQUID chip on a cold plate: flux lines thread the loop, the bias current splits into two arms, and the junctions light up when the loop turns resistive. Drag to orbit.

Switch to 2D
Controls

Presets

Parameters

Quality

Camera

Model checks

The science

The device. A dc SQUID (superconducting quantum interference device) is a superconducting loop interrupted by two Josephson junctions. A junction passes a supercurrent Ic sin δ that depends on the quantum phase difference δ of the superconducting wave function across it, and a voltage V makes the phase advance as dδ/dt = 2eV/ℏ. The loop can only hold magnetic flux that fits the phase condition, so the two phases are tied together: δ1 − δ2 = 2πΦT/Φ0, with the flux quantum Φ0 = h/2e = 2.0678×10−15 Wb.

Model. Both junctions are resistively shunted (resistance R, overdamped, no capacitance), the bias current I splits into the two arms, and the loop has inductance L split equally between the arms. With τ = 2πI0R t/Φ0 and i = I/I0 the arms obey dδ1/dτ = i/2 + j − (1+a) sin δ1 and dδ2/dτ = i/2 − j − (1−a) sin δ2, where j = (δ2 − δ1 + 2πφ)/(πβL) is the circulating current in units of I0, φ the applied flux in Φ0, βL = 2LI0/Φ0 and a the junction asymmetry. The circulating current screens the loop: ΦT = Φa − LJ. The output voltage is the average of the two junction voltages.

Critical current. The largest bias that still gives zero voltage is found by solving the static phase condition for every δ1 and taking the maximum of (1+a) sin δ1 + (1−a) sin δ2. Without screening it is 2I0|cos(πΦ/Φ0)| and the supercurrent is periodic in the flux with period Φ0; screening makes the modulation shallower. Above Ic the phases run and a voltage appears; without screening the average is V = (R/2)√(I² − Ic²). The steep part of the V(Φ) curve is what makes the SQUID a very sensitive magnetometer: the transfer |dV/dΦ| is shown.

What the six checks compare. (1) A brute-force phase search against 2I0|cos(πΦ/Φ0)|. (2) The same search with asymmetric junctions against the phasor-sum formula. (3) RK4 time stepping of both phases against the closed-form resistive-state voltage. (4) Energy balance: the work of the current source minus the Joule heat equals the change of Josephson plus inductive energy over the same window (this tests the equations, the integrator and the screening sign together). (5) Periodicity, even symmetry and the reversal symmetry of the critical current with screening and asymmetry. (6) The flux quantum from the exact SI constants h and e against the CODATA value.

Simplifications and honest limits. Overdamped junctions without capacitance (hysteresis is absent), no thermal noise (real devices at 4 K have a noise rounding of the I–V curve), identical shunts in the two arms, a lumped inductance without the junction capacitance resonances, no flux trapping, and βL kept at or below 0.6 so the static solution is unique (practical SQUIDs are often designed near βL = 1). The time axis of the animation is slowed by many orders of magnitude, because the real Josephson oscillation is at microwave frequencies (2e·V/h is about 483.6 MHz per microvolt). The parameter values are illustrative, not a specific device. Flux lines and field dots are schematic: 6 (3D) or 8 (2D) symbols per flux quantum, not a field calculation. Constants: h and e are the exact SI defining values; the textbook relations follow Clarke and Braginski, The SQUID Handbook, and Tinkham, Introduction to Superconductivity.

Loading model...
Loading Blender model...
-
-
Made with 🟠 Blender · Three.js