DEEP CURRENTInteractive energy lab
Marine renewable energy · 3D engineering explorer

Underwater Tidal Energy Turbine

Explore how a powerful ocean current turns a seabed-mounted rotor into a source of predictable renewable electricity. Adjust the operating conditions and inspect the machine from every angle.

Interactive 3D simulation
Live turbine model / Seabed installation
SYSTEM RUNNING
Drag to orbit · Scroll to zoom · Right-drag to pan
Preparing the underwater environment
Initialising 3D renderer and turbine components…

Explore turbine components

The three hydrofoil-shaped blades transfer hydrodynamic torque to the central hub and main shaft.

Model status

The turbine is operating with a simplified hydrodynamic power model. Live values respond to the selected current speed and blade pitch.

01 / Overview

About This 3D Simulation

This interactive underwater tidal energy turbine simulation explores one of the most promising forms of marine renewable energy: extracting electricity from the natural movement of the sea. Tidal currents are driven primarily by the gravitational influence of the Moon and Sun. Unlike many weather-dependent energy sources, tides follow highly predictable astronomical cycles, making tidal stream generation an attractive option for suitable coastal locations.

The 3D scene presents a conceptual seabed-mounted turbine installed in a submerged environment. At the centre of the machine is a three-bladed rotor. Its curved hydrofoil profiles are designed to interact with moving water and create torque around a horizontal shaft. The shaft transfers mechanical power into a streamlined nacelle, where a simplified drivetrain and generator assembly are represented. A tapered support tower carries the turbine above the seabed, while a foundation transfers structural loads into the ground. An illustrative export cable follows the support structure to represent the route by which generated electricity can leave the installation.

Use the controls to change the speed of the incoming current, adjust blade pitch, reverse between flood and ebb flow, and change the simulation time scale. The rotor responds dynamically, while the live telemetry panel estimates rotational speed, tip speed ratio, capture efficiency, shaft torque, and electrical output. Flow tracer particles make the direction of the water movement easier to understand. You can orbit, pan, and zoom around the installation, or select the rotor, generator, and support structure to highlight the relevant assembly.

The visualisation is designed for students, educators, renewable-energy enthusiasts, and anyone curious about marine engineering. It connects an intuitive 3D model with the basic physics of hydrokinetic power conversion: moving water carries kinetic energy, the rotor captures part of that energy, and a generator converts mechanical rotation into electricity. The simulation also demonstrates why current velocity matters so much, why blade pitch is an important operating parameter, and why real tidal projects must balance energy production with structural, environmental, and maintenance requirements.

Although the model uses physically motivated equations, it is an educational approximation rather than a certified engineering design. It does not solve full three-dimensional turbulent flow or calculate structural stresses. Its purpose is to make the operating principles of an underwater tidal turbine visible, interactive, and easier to explore.

02 / Engineering principles

How It Works

1. Capturing energy from a moving current

Seawater moving through the rotor's swept area carries kinetic energy. The turbine blades are hydrofoils: their shape and angle create a pressure difference and hydrodynamic lift as water passes over them. The resulting force has a tangential component that turns the rotor. The central hub combines the torque from all three blades and transfers it to the main shaft.

The power available in an undisturbed current is commonly estimated from the kinetic energy flux through the rotor area:

Pavailable = ½ ρ A v³

Here, ρ is water density (approximately 1,025 kg/m³ for seawater), A is the rotor's swept area, and v is the current speed. The cubic relationship is important: if velocity doubles, the theoretical power passing through the same area becomes eight times greater. A turbine cannot capture all of this energy, because water must continue moving downstream and real machines have hydrodynamic and mechanical losses.

2. Rotor, shaft, and generator

Three blades attach to a hub on the rotor axis. As the current turns them, the shaft carries torque into the nacelle. A commercial turbine may use a gearbox to increase shaft speed or a direct-drive generator designed for lower rotational speed. Bearings support rotating parts, while seals protect equipment from seawater.

Inside the generator, relative movement between magnetic fields and conductive windings induces voltage. Power electronics regulate the output before it travels through a subsea export cable. The 3D model groups these internal systems into a simplified generator housing.

3. Blade pitch and rotor operating point

Blade pitch is the angle of a blade relative to its reference orientation. Changing it alters the hydrodynamic forces acting on the blade. A controller can use pitch to improve energy capture, regulate torque, or limit loads in strong currents. This simulation uses a simplified efficiency curve with its best region near the default setting; it does not reproduce full blade-element hydrodynamics.

Rotor speed can be described using the tip speed ratio, λ, which compares blade-tip speed with incoming current velocity:

λ = (ω R) / v

Here, ω is angular velocity in radians per second and R is rotor radius. Each turbine has an efficient operating region. The model moves rotor speed gradually toward a target set by current speed and blade pitch.

4. From mechanical power to electrical output

The model multiplies available current power by a capture coefficient, then applies combined drivetrain and generator efficiency. An illustrative rated-power cap represents real operating limits. Shaft torque is estimated from power divided by angular speed, with a low-speed guard when the rotor is stopped.

Pelectrical ≈ min(Prated, ½ ρ A v³ Cp η)

Cp is the modelled capture coefficient and η represents combined drivetrain and generator efficiency. The values shown are illustrative and should not be used to size equipment or predict a real site's energy yield.

5. Flood and ebb operation

Tidal currents reverse as the tide changes. A bidirectional installation must operate during both flood and ebb conditions. Designs may use symmetric blades, pitch adjustment, rotor yaw, or drivetrain control. Here, Flood and Ebb reverse the visual flow and rotor rotation as a simplified demonstration.

6. Structure, seabed, and real-world constraints

The support tower and foundation carry the turbine's weight and loads from current, waves, vibration, and rotor operation. Marine structures must withstand corrosion, fatigue, biofouling, seabed movement, and difficult maintenance access. Designers also assess navigation, fishing, marine habitats, sediment transport, cable routing, and grid connection. The foundation shown is conceptual, not a geotechnical design for a specific site.

Model limitation: The simulation uses a lumped dynamic rotor response and a simplified power-coefficient curve. It does not calculate blade-element loads, turbulence, cavitation, wake interactions, structural fatigue, or electromagnetic fields. Treat its live measurements as educational estimates, not engineering specifications.
03 / Interactive guide

How to Use This Simulation

Explore the turbine from different angles, then change one operating parameter at a time and watch how the machine responds. The viewer and control panels are designed to work with a mouse, trackpad, or touch input.

1. Navigate the 3D sceneDrag to orbit around the turbine. Scroll to zoom in or out. Right-drag to pan. Select Reset view to return to the initial camera position.
2. Run the machineUse Pause and Start to stop or resume the rotor animation. Reset restores the default settings, flow direction, and camera position.
3. Change the currentMove the Current speed slider from 0 to 4 m/s. Observe the particle flow, rotor RPM, and estimated electrical output.
4. Adjust blade pitchMove the Blade pitch slider between 0° and 30°. Compare the capture-efficiency estimate and power output around the default operating point.
5. Reverse the tideChoose Flood tide or Ebb tide to reverse the flow tracers and rotor direction. This illustrates a turbine operating in reversing tidal currents.
6. Inspect componentsSelect Rotor assembly, Generator, or Support structure below the viewer. The chosen subsystem is highlighted and its role is described.

The telemetry values are calculated continuously from the simplified model. Electrical output is shown in kilowatts, rotor speed in revolutions per minute, tip speed ratio as a dimensionless value, capture efficiency as a percentage, and estimated shaft torque in kilonewton-metres.

04 / Knowledge base

Frequently Asked Questions (FAQ)

Explore the most common questions about tidal stream technology, the turbine's operating principles, and the interactive model.

What is an underwater tidal turbine?
An underwater tidal turbine is a hydrokinetic machine that extracts energy from moving seawater. Tidal currents are created mainly by the gravitational interaction of the Moon, the Sun, and Earth, together with local coastal geography. Water flowing through the rotor turns its blades, which drive a shaft connected to a generator. Unlike a tidal barrage, a free-stream turbine does not need to hold back a large body of water behind a dam. This simulation shows a simplified seabed-mounted turbine and the main stages that convert current speed into electrical power.
How does the tidal turbine convert ocean current into electricity?
The current transfers kinetic energy to the rotor blades. Their hydrodynamic lift produces torque around the rotor shaft, causing the hub and drivetrain to rotate. A gearbox may increase rotational speed, although direct-drive designs can connect the rotor to a low-speed generator. Inside the generator, relative motion between magnetic fields and electrical windings induces voltage. Power electronics condition the output before it is sent through an export cable. In this visual model, rotor response and estimated electrical output change when you adjust current speed and blade pitch.
What are the main parts of the underwater turbine shown here?
The visible assembly includes a three-bladed rotor, central hub, main shaft, nacelle, generator housing, support tower, seabed foundation, and an illustrative export cable. The blades capture energy from the flow, while the hub transfers their combined torque to the shaft. The nacelle encloses drivetrain and generator equipment. The support structure holds the rotor at its operating depth and transfers loads into the foundation. Real projects may also include seals, bearings, monitoring sensors, converters, protective housings, and cable protection systems that are simplified or not individually modelled here.
Which scientific principles determine tidal turbine performance?
Performance is governed by fluid dynamics, conservation of energy, rotor aerodynamics adapted to water, and electromagnetic induction in the generator. The kinetic power available in a current is proportional to water density, swept rotor area, and the cube of current speed. Only a fraction of that power can be captured because some kinetic energy must remain in the moving water. Blade pitch, rotor speed, turbulence, blockage, and drivetrain efficiency influence the final output. The simulation uses a simplified power-coefficient model to demonstrate these relationships rather than solving the full turbulent flow around each blade.
Where are underwater tidal turbines used in the real world?
Tidal stream turbines are considered for energetic channels, straits, headlands, and coastal sites where predictable tidal currents are strong enough for economic operation. Arrays can be installed on the seabed or supported from floating platforms, depending on water depth, geology, maintenance strategy, and environmental conditions. Electricity can serve nearby islands, coastal communities, or national grids through subsea cables. Site selection must account for navigation, marine habitats, sediment transport, fishing activity, grid connection, and access for maintenance vessels. The simulation represents one conceptual seabed-mounted arrangement, not a design for a specific site.
Why does current speed have such a large effect on power output?
The kinetic power flowing through a rotor's swept area scales with the cube of current velocity. If current speed doubles, the theoretical power in the undisturbed flow becomes eight times larger, assuming density and area remain constant. Actual electrical output will not always increase by that exact factor because turbines have operating limits, changing efficiency, control strategies, and rated-power constraints. The control panel lets you vary current speed and observe the model's estimated output. The power display is capped at the illustrative rated capacity so the interface does not imply unlimited generation at extreme speeds.
How can I use this interactive 3D tidal turbine simulation?
Drag in the viewer to orbit around the turbine, use the mouse wheel or trackpad to zoom, and right-drag to pan. Select Start or Pause to control the rotor animation, and use Reset to restore the initial settings and camera. The current-speed slider changes the incoming flow, while blade pitch changes the simplified capture-efficiency curve. Choose Flood or Ebb to reverse the flow direction. The Flow field button shows or hides moving tracer particles. Select Rotor, Generator, or Support to highlight a subsystem and read a short explanation. Live values update while the model runs.
What happens when I change blade pitch or reverse the tidal flow?
Blade pitch changes the angle at which each blade meets the current. In a real turbine, pitch control can help regulate torque, maintain efficient operation, and reduce loads in changing conditions. This model has a simplified efficiency curve with a best operating region near the default setting; moving far from that region reduces estimated capture efficiency. Switching between Flood and Ebb reverses the flow tracers and rotor direction to illustrate bidirectional tidal operation. Real bidirectional machines may use blade pitch, yaw, or drivetrain control strategies that are more sophisticated than this visual representation.
Is this simulation a precise engineering design or a safety assessment?
No. It is an educational visualisation, not a certified engineering model, site assessment, or operational safety tool. The rotor response is represented with a simplified dynamic model, and the power estimate uses idealised assumptions for density, swept area, capture coefficient, and drivetrain efficiency. The scene does not calculate blade stresses, cavitation, fatigue, turbulent wake interaction, corrosion, biofouling, cable loads, foundation response, or marine environmental impacts. Real projects require validated computational fluid dynamics, structural analysis, geotechnical surveys, grid studies, environmental assessment, and testing by qualified engineering teams.
What is the Betz limit, and does it apply to tidal turbines?
The Betz limit is the ideal maximum fraction of kinetic power that an unconfined actuator disk can extract from a steady stream, approximately 59.3 percent. It follows from the need for some water to continue downstream rather than being brought to a complete stop at the rotor. The principle is commonly used as a reference for both wind and hydrokinetic turbines, although real marine installations introduce additional effects such as free-surface proximity, seabed clearance, channel blockage, turbulence, and array interactions. The simulation uses a lower illustrative capture coefficient and does not attempt to model the full Betz-limit derivation.
05 / Search metadata

SEO Information

SEO titleUnderwater Tidal Turbine 3D Simulation | Clean Energy
Primary keywordtidal turbine simulation
Meta descriptionExplore this interactive 3D tidal turbine. Adjust current speed and blade pitch, inspect components, and see how underwater turbines generate electricity.
URL slugunderwater-tidal-turbine-simulation
Secondary keywordsunderwater turbine 3D, tidal energy, marine renewable energy, hydrokinetic turbine, tidal stream generator
Canonical URLNot specified — add the final production URL when published.
Made with 🤖 ChatGPT · Three.js