INTERACTIVE OCEAN ENGINEERING 01 / RENEWABLE SYSTEMS

THE UNDERWATER ENERGY LAB

Tidal turbine
power lab.

Control an underwater tidal turbine in a living 3D ocean. Change the current, tune the blades, and discover how the movement of water becomes electricity.

EXPLORE THE SIMULATION
EXPERIMENT 001Hydrodynamics
× Energy Conversion
INTERACTIVE • EDUCATIONAL • REAL TIME
01 / INTERACTIVE LABORATORYDIGITAL TWIN · EDUCATIONAL MODEL

YOUR EXPERIMENT STARTS HERE

Tidal Stream Turbine

Manipulate the operating conditions and observe how the turbine responds below the surface.

LIVE 3D ENVIRONMENT
Ø 4.4 M ROTORSEAWATER · 1,025 KG/M³
INITIALISING OCEAN ENVIRONMENTLoading the 3D renderer...
FIELD UNIT // TS–01
NORTH ATLANTIC
RESEARCH STATION
RENDERER: INITIALISING/-- FPS
DRAG TO ORBIT · SCROLL TO ZOOM
ELECTRICAL OUTPUT
--kW
ESTIMATED GENERATOR POWER
ROTOR SPEED
--rpm
ACTUAL SIMULATED ROTATION
POWER COEFFICIENT
--Cp
FRACTION OF FLOW ENERGY CAPTURED
TIP-SPEED RATIO
--λ
BLADE TIP SPEED / CURRENT SPEED
TRY THESE EXPERIMENTS

Select a preset, then alter individual controls to investigate the response.

02 / THE TECHNOLOGY

ABOUT THIS 3D SIMULATION

Energy hiding
in plain sight.

Every change of tide moves an extraordinary mass of water. A tidal stream turbine turns part of that motion into low-carbon electrical energy—without building a barrier across an entire estuary.

This interactive tidal turbine simulator places you next to an underwater, horizontal-axis energy converter. At its centre is a three-bladed rotor attached to a streamlined nacelle, which houses the drivetrain and electrical generator. A tall support structure anchors the machine to the seabed, while an electrical cable carries its output toward shore. The animated ocean surface, underwater lighting and moving particles help make the surrounding environment understandable rather than merely decorative.

Unlike a conventional wind turbine, this machine works in seawater, a fluid approximately 800 times denser than air at ordinary surface conditions. That density allows a relatively compact rotor to intercept a substantial amount of kinetic energy, but it also creates difficult challenges. Engineers must account for large forces, corrosion, marine growth, access for maintenance, shifting tidal direction and the ecological effects of installation.

The main experiment is simple: adjust the current speed and watch what happens to the rotor and estimated electricity generation. You can also change blade pitch, vary the generator load, reverse the flow and inspect a simplified view of the mechanism inside the nacelle. The dashboard displays electrical power, rotor revolutions per minute, power coefficient and tip-speed ratio. These measurements are linked to the same reduced-order mathematical model that drives the animation, rather than arbitrary numbers.

The simulated rotor diameter is 4.4 metres, making it a teaching-scale design rather than an exact replica of a particular commercial installation. Its geometry, flow patterns and performance assumptions are illustrative, with physical dimensions and seawater density provided to support useful calculations. This distinction matters: the experience demonstrates general engineering principles but does not replace tank testing, computational fluid dynamics, structural analysis or environmental assessment.

Use the laboratory as a practical introduction to tidal stream energy, turbine hydrodynamics and renewable power conversion. It is particularly useful for students, teachers and curious engineers who want to connect equations to visible mechanical behaviour. By experimenting with different conditions, you can discover why current velocity, efficient blade operation and generator control all matter to the amount of electricity a tidal turbine can produce.

03 / UNDERSTANDING THE MACHINE

How it works.

From the movement of seawater to electricity on land, discover the basic engineering model behind the simulation.

01

Moving water carries energy

When a current flows through the circular area swept by the blades, it transports kinetic energy. The available flow power is Pflow = ½ρAv³, where ρ is water density, A is rotor swept area and v is water speed. A 4.4 m diameter rotor sweeps about 15.2 m². Because velocity is cubed, doubling the current speed increases the available kinetic power eightfold, assuming everything else stays constant. This strong velocity dependence is central to selecting suitable tidal sites.

02

Hydrodynamic lift turns the blades

Each blade is shaped to create a pressure difference as seawater moves across it. That lift force, together with drag, generates torque around the hub. Three blades provide a practical compromise among smooth operation, hydrodynamic efficiency and mechanical complexity. The pitch slider changes each blade's orientation. In a real turbine, the best angle depends on local flow and rotor speed; excessive pitch can reduce useful lift or drive the blade toward stall.

03

The drivetrain extracts rotation

The rotor turns a shaft connected to a generator. Inside a commercial machine, this connection may be direct drive or may pass through a gearbox. In this demonstration, the visible cutaway represents a simplified generator assembly, not a detailed electrical schematic. A generator imposes resisting torque while converting mechanical work into electricity. Changing the load alters the modelled rotor-speed target and the share of captured energy passed to the electrical output estimate.

04

Tip-speed ratio controls efficiency

The tip-speed ratio is λ = ωR / |v|, where ω is angular velocity in radians per second and R is rotor radius. It measures how fast the blade tips move relative to the water. The simulation uses a smooth, illustrative power-coefficient curve that peaks around a preferred tip-speed ratio. The power coefficient, Cp, expresses captured mechanical power as a fraction of available flow power. An ideal freely operating actuator disk cannot exceed the Betz limit of approximately 59.3% in the classical one-dimensional model.

05

Power conversion has losses

Estimated electrical output is calculated from Pelectric = ½ρAv³Cpηfload. Here η is a fixed illustrative generator efficiency of 92% and fload is a simplified extraction factor based on the load setting. As a result, the power display changes for physical reasons rather than simply following animation speed. The current direction switch reverses the flow and adjusts the turbine heading; the model otherwise treats both directions symmetrically.

06

What the model leaves out

Real tidal turbines experience turbulence, shear across the water column, wake interactions, cavitation risk, blade flexibility, changing pitch control laws and detailed electrical constraints. These are not resolved here. Instead of computational fluid dynamics or a complete torque-inertia solver, rotor speed gradually approaches an operating point derived from current speed, blade pitch and generator load. This produces an intuitive transient response, but the model is not suitable for predicting the performance of a real installation.

THE FUNDAMENTAL RELATIONSHIP
P = ½ ρ A v3 Cp η

A small increase in tidal velocity can produce a large increase in potential power. The output also depends on how effectively the rotor and generator operate.

04 / USER GUIDE

How to use
this simulation

01

Move through the scene

Drag in the 3D viewer to orbit around the turbine. Scroll or pinch to zoom, right-drag to pan on desktop, and select the target icon to reset your viewpoint.

02

Change the conditions

Use the sliders to adjust water speed, blade pitch, generator load and simulation time scale. Each setting changes the rotor movement, power estimate or both.

03

Pause, inspect and compare

Pause the model to inspect the geometry. Click an identifiable turbine component to read its description. Enable the generator cutaway to see inside the nacelle.

04

Run your own experiment

Try the three presets, or increase current speed while keeping other parameters fixed. Compare the live power, rotor speed, coefficient and tip-speed ratio indicators.

05

Explore the flow

Toggle flow particles to show the direction of the current. Use the reverse-current switch to turn the turbine around and observe a simplified tidal reversal.

06

Return to the baseline

Use Reset to restore the initial settings, rotor state and camera. If the 3D engine is unavailable, all written explanations and FAQ entries remain readable.

05 / YOUR QUESTIONS, ANSWERED

Deep dive FAQ.

Ten detailed answers about tidal energy, turbine design and the science behind this interactive model.

01What is a tidal stream turbine, and how is it different from a tidal barrage?

A tidal stream turbine extracts energy directly from moving seawater, much as a wind turbine extracts energy from moving air. Its blades rotate in the current and drive an electrical generator, typically while the machine is anchored to the seabed or supported by a floating structure. A tidal barrage works differently: it uses a barrier and a difference in water level between two sides of an estuary or bay. Water passing through the barrage drives turbines as the tide rises or falls. Stream turbines generally require less large-scale alteration of the coastline, although their foundations, cables and operation still affect the marine environment. The simulator represents a horizontal-axis tidal stream turbine, not a barrage, and focuses on its rotor and power-conversion process.

02How does moving seawater actually make the turbine rotate?

Water approaching the turbine meets three specially shaped blades. Their curved surfaces deflect the flow and create hydrodynamic forces, especially lift, with a tangential component that produces torque around the rotor axis. As the shaft rotates, it delivers mechanical power to a generator. The generator creates an electromagnetic resisting torque and converts part of the shaft's mechanical energy into electrical energy. The blades do not simply get pushed around like paddles; efficient turbines rely heavily on blade-section aerodynamics adapted to water. In the simulation, the rotor animation reflects current speed, blade pitch and generator load. Its motion follows a simplified response model rather than a computationally intensive simulation of every turbulent vortex around each blade.

03What are the major components of an underwater tidal turbine?

The most recognisable components are the blades, hub, nacelle, supporting structure and subsea cable. The blades capture energy from the moving water, while the central hub holds them in place and transmits their torque to a shaft. The nacelle provides a protective housing for the generator, bearings, seals and, in some designs, a gearbox. A support tower and foundation keep the turbine positioned in the flow despite substantial hydrodynamic forces. The subsea cable transfers electricity to additional equipment and eventually the grid. Actual machines also require control electronics, condition monitoring, corrosion protection and ways to access or retrieve the equipment for maintenance. Select the visible parts in the 3D viewer, or enable the cutaway to examine a simplified generator interior.

04Why does the electricity output rise so quickly as the tidal current increases?

The kinetic power carried by moving water is proportional to the cube of its speed: P = ½ρAv³. This means that, for the same density and rotor area, doubling current speed raises the theoretical available power by a factor of eight. However, electrical output does not always follow that exact relationship because the rotor's capture efficiency, generator operating conditions and practical power limits may also change. In this educational simulator, the power coefficient varies with tip-speed ratio and blade pitch, while load affects the extracted portion. Move the current-speed slider upward in small steps and observe the live kilowatt display. The relationship illustrates why site surveys focus so closely on current velocities and tidal duration.

05Where are tidal stream turbines installed, and what makes a good location?

Promising tidal stream sites include narrow channels, straits and headlands where tidal motion naturally accelerates water. Engineers look for reasonably fast, predictable currents together with suitable water depth, seabed conditions and manageable distances to an electricity connection. They also evaluate shipping routes, fishing activity, sediment movement, marine wildlife and the effects of installation and maintenance. A location with extremely strong flow is not automatically ideal: it may expose the machine to excessive loads or make servicing difficult. Tidal currents change through their daily cycle and over the spring-neap cycle, so energy yield must be assessed over time rather than at one peak-speed measurement. This simulator holds current speed constant until you change it and is designed for learning, not for site certification.

06What do the power coefficient and tip-speed ratio mean?

The power coefficient, written Cₚ, describes how much of the kinetic power passing through the swept area is captured mechanically by a turbine. It is a dimensionless number, not a percentage of the electricity consumed by an entire community. The tip-speed ratio, written λ, is the speed of the blade tip divided by the incoming water speed: λ = ωR/|v|. Each rotor design typically works best over a particular range of ratios. If the blades rotate too slowly or too quickly relative to the flow, energy capture can fall. The simulator uses an illustrative efficiency curve with a preferred ratio and adjusts the calculated Cₚ according to blade pitch. It stays below the classical Betz limit, although real marine performance requires more detailed modelling.

07How can I use the 3D simulation to run a meaningful experiment?

Start with the default operating conditions and write down electrical power, rotor revolutions per minute and the power coefficient. Change only one variable at a time so you can identify its influence. For example, raise current speed from 2.0 to 3.0 metres per second while leaving blade pitch and generator load unchanged. Then return to the original speed and sweep through different blade angles to compare efficiency. The generator-load slider provides another experiment: observe the change in rotor speed and electrical extraction. You can pause rotation for closer visual inspection, display flow particles to follow the water direction and use the cutaway to reveal the generator region. Presets offer useful starting points, but carefully controlled comparisons teach more than changing every slider at once.

08What happens when blade pitch or generator load is changed?

Changing blade pitch rotates the blade sections relative to the incoming flow. At some pitch settings the sections can produce useful lift efficiently; at others, the angle of attack and associated losses reduce energy capture. A real controller may adjust pitch to maximise generation or protect the turbine in unusually strong conditions. Generator load describes how strongly electrical conversion resists the rotor. Greater resisting torque normally slows a turbine unless additional hydrodynamic torque balances it. This simulator approximates those relationships using a target rotor speed, a pitch-dependent power coefficient and a simplified load factor. It does not model detailed blade-section stall, power electronics or gearbox dynamics. Try changing pitch and load separately, then compare the dashboard readings after the rotor has settled.

09How realistic is this model, and are there environmental or safety concerns?

The simulator uses meaningful relationships for flow power, swept area, tip-speed ratio and an approximate efficiency curve. Its 3D geometry, water particles and transient rotor speed are designed to make these ideas clear, not to reproduce every physical detail. It omits turbulence-resolving fluid dynamics, cavitation predictions, structural fatigue, turbulent wakes, detailed generator protection and site-specific tidal time series. Real-world installations also require extensive consideration of marine habitats, animal interactions, underwater noise, navigation, seabed disturbance and electrical safety. Engineers perform surveys, risk assessments, mechanical analysis and environmental monitoring before deployment. Neither the measured values nor the animations here should be used to size a commercial turbine, evaluate wildlife risk or certify equipment as safe.

10Why is the Betz limit important, and can a tidal turbine reach it?

The Betz limit, approximately 59.3%, is the maximum power coefficient predicted by the classical idealised actuator-disk model for a freely operating turbine in an unbounded, incompressible flow. The key idea is that the turbine cannot remove all the moving water's energy: water must retain enough downstream momentum to keep passing through the rotor. Practical devices fall below ideal limits because of blade drag, tip losses, turbulence, mechanical losses and operating constraints. In confined channels, additional blockage and free-surface effects make simple interpretations of the classical limit less straightforward. The simulator intentionally uses an illustrative peak coefficient below 0.593. It provides a useful starting point for learning about extraction efficiency, but it is not a substitute for a site-specific hydrodynamic calculation.

Made with 🤖 ChatGPT · Three.js