AETHER/LAB INTERACTIVE ENGINEERING
EXPERIENCE 001 · RENEWABLE ENERGY

Inside a wind turbine.
Understand the power of air.

An interactive 3D engineering laboratory. Investigate a working turbine, inspect its hidden machinery and discover how small adjustments change the electricity generated from moving air.

44 M ROTOR DIAMETER 55 M HUB HEIGHT 900 KW MODEL RATING
LIVE SIMULATION / WT–044 RENDERER LOADING
SYSTEM READY DRAG TO ORBIT · SCROLL TO ZOOM · CLICK TO INSPECT
ROTOR SPEED0.0rpmAerodynamic response
TIP-SPEED RATIO0.00λRotor tip speed ÷ wind speed
POWER COEFFICIENT0.000CpEstimated wind energy capture
ROTOR TORQUE0kN·mAerodynamic driving torque
POWER TRENDLAST 90 MODEL SECONDS

About the physics: This is an educational, reduced-order wind turbine model, not an engineering certification tool or computational fluid-dynamics solver. The rotor follows a simplified torque-balance equation. The blade aerodynamics, drivetrain, blade-pitch effects, gearbox staging and air tracers are approximations; values should not be used to design or operate real equipment.

01 / OVERVIEW
THE SCIENCE OF RENEWABLE POWER

AN INSIDE LOOK AT CLEAN ENERGY

About This 3D Simulation

Wind turbines are extraordinary machines: they turn the invisible motion of air into the controlled rotation of a generator, and ultimately into useful electricity.

This interactive 3D wind turbine simulation opens up that conversion process. The scene portrays a three-bladed, horizontal-axis turbine with a 44-metre rotor, a 55-metre hub height and an illustrative rated electrical output of 900 kilowatts. It combines a sculpted rotor, tapered steel tower, mechanical hub, inspection platform and a partly transparent nacelle with moving shafts, gear wheels and generator elements. The model is purpose-built for exploration rather than copied from a specific commercial manufacturer's design.

Begin by rotating the camera around the turbine and moving closer to the machinery. Switch on the internal cutaway to see how rotation passes from the slowly turning rotor to the drivetrain. Click a visible component to identify it. Airflow tracers reveal the wind's incoming direction, while a series of live instruments reports rotor speed, aerodynamic torque, tip-speed ratio, estimated power coefficient and delivered electrical power. A small trend graph helps reveal how the output changes over time.

Instead of simply watching a looping animation, you control the experiment. Increase the wind speed to observe the rapid rise in available wind power. Change the blade pitch to make the airfoil less effective at driving rotation. Introduce yaw misalignment to examine why a turbine must face the approaching wind. Adjust the generator load to discover the relationship between resisting torque and rotor speed. You can pause the system, apply a mechanical brake, return to a preset camera view or restore the initial conditions at any moment.

The experience also explains why a wind turbine cannot collect every watt of kinetic energy passing through its swept area. Its calculations distinguish the total power available in moving air from the smaller proportion transferred into useful mechanical and electrical power. A basic inertia model makes acceleration and braking take time rather than changing speed instantaneously.

This browser-based wind energy laboratory is intended for curious visitors, students, teachers, engineering enthusiasts and anyone investigating renewable electricity. It makes important aerodynamic ideas tangible while clearly identifying the simplifications that separate a teaching model from industrial turbine simulation software.

02 / ENGINEERING
FROM AIRFLOW TO ELECTRICITY

UNDERSTAND THE MECHANISM

How It Works

1. Harvesting energy from moving air

Air carries kinetic energy because it has mass and velocity. As wind crosses the swept circle of a turbine, lift generated by its rotating airfoil blades produces a tangential force. This force creates torque about the horizontal rotor shaft. The blades do not work like flat paddles pushed directly by wind: their aerodynamic shape develops lift through relative airflow, which itself depends on both wind velocity and blade motion.

AVAILABLE WIND POWERPwind = ½ ρ A v3ρ = air density (1.225 kg/m³)   ·   A = πR²   ·   v = wind speed (m/s)

The equation shows why wind speed is so important. Doubling wind speed, while keeping other assumptions fixed, multiplies the available wind power by eight. The 22-metre blade radius of this model gives a swept area of approximately 1,521 square metres. That is the area of moving air considered by the simplified energy calculation, not the physical surface area of the blades.

2. Blade pitch, yaw and aerodynamic efficiency

The power coefficient (Cp) expresses the share of available wind power transferred to the rotor. In this educational model, Cp is represented by a smooth curve that depends on tip-speed ratio (λ), blade-pitch setting and yaw misalignment. Tip-speed ratio compares the linear speed at the rotating blade tip with the approaching wind speed. An illustrative optimum occurs near λ = 7.5 when the pitch is close to zero. The simulated maximum Cp is approximately 0.46, safely below the theoretical Betz limit of 16/27, or roughly 59.3%.

Changing the blade pitch reduces aerodynamic capture in the model. Turning the rotor away from the incoming wind reduces the effective capture through an approximate cosine-cubed yaw factor. Neither simplification captures every feature of three-dimensional aerodynamics, stall, turbulence, blade flexibility or wake dynamics; real turbines are characterised by extensive testing and more detailed models.

3. The shaft, gears and generator

The central hub transmits aerodynamic torque into a low-speed shaft. Inside the nacelle, a visible large and small gear demonstrate the mechanical principle of speed conversion: a smaller driven gear rotates faster while transmitting proportionately less torque, before losses. The scene displays a simplified first gear stage, not the full multi-stage gearbox or power-electronic conversion system of a commercial geared turbine. The animated generator housing helps connect the shaft's motion with electricity generation, which in real equipment relies on electromagnetic induction.

ROTOR DYNAMICSJ · dω/dt = Taero − Tgen − Tbrake − TlossJ = effective inertia   ·   ω = angular velocity   ·   T = torque

4. How the controls affect the physical model

The simulation integrates a reduced-order rotational equation over successive frames. Aerodynamic driving torque accelerates the rotor; generator loading, friction and an optional brake oppose its motion. Raising generator load generally strengthens resisting torque and changes the rotor's equilibrium speed. The electrical meter estimates generator torque multiplied by shaft angular velocity and a fixed illustrative conversion efficiency. Power is bounded by the model's 900-kilowatt nameplate rating; high-wind operating conditions are not managed by a complete automatic industrial controller.

At the start of an experiment, a high wind speed normally increases both available torque and potential power. Extreme pitch or yaw settings reduce capture. The brake dissipates rotational energy without producing electrical output. The time-scale slider changes how fast the numerical model progresses, not the environmental wind speed or turbine geometry.

5. What this simplified model can teach

The central insight is that output depends on an interacting system, not a single variable. Wind velocity, rotor radius, aerodynamic efficiency, orientation, torque demand and rotational inertia all matter. Real turbines add variable-speed electrical systems, sophisticated pitch and yaw controllers, cut-in and cut-out limits, thermal constraints, structural loads and grid requirements. This simulation deliberately leaves out those advanced controllers, detailed electromagnetic behaviour and computational fluid dynamics. Use it to explore cause and effect, compare settings and build intuition, rather than to predict the output of a particular wind farm.

GET HANDS-ON

How to Use This Simulation

Six short experiments to help you learn by observation.

01

Explore the 3D model

Drag within the viewer to orbit, use the mouse wheel or pinch gesture to zoom, and right-drag to pan. Use the three camera buttons for wide, front and close-up nacelle views.

02

Identify parts

Click the blades, hub, tower, nacelle, gears or generator to reveal a short component description. Turn on Reveal internals to expose more of the drivetrain.

03

Investigate wind speed

Raise wind speed from 5 to 12 m/s, allow the rotor time to respond, and compare output on the electrical meter, live graph and rotor-speed display.

04

Change rotor alignment

Increase blade pitch, then restore it. Next, move yaw misalignment away from zero. Observe the corresponding decrease in capture efficiency and driving torque.

05

Test generator load

Move the loading slider between 30% and 120%. Watch how the generator's opposing torque changes rotor speed, tip-speed ratio and electrical output.

06

Brake, pause and reset

Activate Brake to slow the rotor, release it to resume production, use Pause simulation to freeze model time, and select reset to restore default conditions.

THE QUESTIONS BEHIND THE MACHINE

Frequently Asked Questions (FAQ)

Detailed answers about the real engineering and the educational model you can explore above.

01What kind of wind turbine does this 3D simulation represent?

The model represents an illustrative three-bladed, horizontal-axis wind turbine, the broad configuration familiar from many onshore wind farms. Its rotor spans 44 metres, and the hub stands 55 metres above the ground. The page uses a 900-kilowatt model rating to give the live power display a practical reference point. The turbine is not a digital twin of any particular manufacturer or installed machine. Its blade geometry, housing design and drivetrain are purpose-built to show key ideas clearly. In particular, the exposed gearbox represents an instructional first stage rather than a complete industrial transmission. The model is most useful for seeing how an aerodynamic rotor, mechanical shaft and generator work together.

02How can turning turbine blades generate electricity?

Wind flowing past a turbine blade creates aerodynamic lift. Because the blades extend radially from a hub, part of the lift contributes torque that turns the rotor and its low-speed shaft. In a geared wind turbine, mechanical power passes through a drivetrain that adjusts speed and torque before driving a generator. The generator converts mechanical energy into electrical energy through electromagnetic induction: moving magnetic fields relative to electrical windings induce voltage. Power electronics and grid controls then condition the generated electricity for use. The visual turbine illustrates the rotation and power-transfer stages, while the actual electromagnetic fields, electrical circuits and grid connection remain outside the model's numerical scope.

03What are the main components visible inside the nacelle?

The nacelle is the machinery housing at the top of the tower. In this 3D scene, you can inspect the rotor hub, a rotating main shaft, two illustrative meshing gears, their supports and a cylindrical generator assembly. The nacelle exterior includes protective panels, access details and the tower-top mounting structure. Turning on Reveal internals increases the transparency of the housing, making the drivetrain easier to examine from several angles. Real geared turbines also use couplings, bearings, lubrication systems, brakes, cooling equipment, sensors and electrical cabinets. Their gearboxes often use multiple stages, unlike the single visible gear pair used here for teaching the basic speed-versus-torque relationship.

04Why does wind power rise so sharply with wind speed?

The amount of kinetic energy passing through a rotor's swept area each second is proportional to the cube of wind speed. A common expression is P = ½ρAv³, where ρ is air density, A is swept area and v is wind velocity. If wind increases from 6 to 12 metres per second, available wind power increases by a factor of eight, provided density and swept area remain unchanged. A real turbine cannot convert all of this available energy into electricity, however. Its efficiency varies with rotor speed, blade pitch, yaw and mechanical conditions. Generator ratings and control systems also restrict output. Try varying wind speed while watching the simulation's live trend to observe these interactions.

05What are the most important real-world uses of wind turbines?

Wind turbines produce electricity without burning fuel during normal operation. Large machines are deployed in onshore and offshore wind farms, where many turbines feed power into an electrical grid. Smaller turbines can supply farms, remote telecommunications sites, isolated microgrids or specialised off-grid systems where wind conditions and economic factors are suitable. Turbine engineering also overlaps with aerodynamics, materials science, high-power electronics, forecasting and structural monitoring. Electricity production changes with wind availability, so grid-scale wind generation generally works alongside storage, transmission networks, demand flexibility and other energy resources. This 3D demonstration concentrates on the energy-conversion process inside one machine rather than forecasting an entire grid or wind farm.

06What do tip-speed ratio, Cp and the Betz limit mean?

Tip-speed ratio, written λ, is the speed of a blade tip divided by the speed of the incoming wind. It helps describe how quickly the rotor turns compared with the surrounding airflow. The power coefficient, Cp, measures the fraction of available wind power that the rotor extracts aerodynamically. It changes with blade design, operating speed, pitch and other conditions. The Betz limit says an ideal actuator disk cannot extract more than 16/27, approximately 59.3%, of the wind's available power. Our simplified model uses a peak Cp of about 0.46, rather than claiming that every operating condition achieves this value. The live readouts make these useful but different quantities easy to compare.

07Which controls should I change to learn the most?

Start by leaving yaw misalignment at zero and blade pitch near its initial low setting. Gradually move the wind-speed slider and watch the power trend, rotor speed and driving torque. Next, increase blade pitch without changing the wind: the model's aerodynamic capture should decrease. Restore pitch, then change the yaw control to see what happens when the rotor no longer faces the wind directly. Finally, move generator loading to explore the balance between aerodynamic driving torque and electrical resistance. For a closer mechanical view, enable Reveal internals and use the magnifying-glass camera preset. Pause, reset or brake whenever you want to repeat an experiment under comparable conditions.

08What happens when blade pitch, yaw and load are changed?

Pitch rotates each blade about its long axis, changing its angle relative to the moving air. In this simplified simulation, a larger pitch reduces the effective aerodynamic power coefficient and therefore the torque available to drive the rotor. Yaw misalignment rotates the nacelle away from the fixed incoming wind direction; the model applies an approximate cosine-cubed efficiency reduction. Generator loading changes the opposing torque imposed on the shaft. Increasing that load can slow the rotor and change its tip-speed ratio, which also changes aerodynamic capture. Because these processes interact, electrical power does not necessarily increase when a single slider is increased. Real control systems manage these relationships using sensors, feedback loops and operating limits.

09Is this simulation accurate enough for real turbine design or safety decisions?

No. The wind turbine lab is a conceptual engineering model intended to explain relationships, not a validated design or safety calculation. It uses an idealised power-coefficient curve, a simplified yaw correction, a lumped rotor-inertia equation, approximate drivetrain losses and a basic electrical output cap. It does not solve the full three-dimensional flow field, transient blade loads, atmospheric turbulence, structural fatigue, complex gearbox dynamics or emergency shutdown behaviour. The visible blades and gearbox are also simplified. Commercial wind turbines require extensive simulations, testing, inspections and compliance with relevant engineering standards. Never use these readouts to size components, set actual operating limits or make decisions about real machinery.

10Why is maximum rotor speed not always maximum electrical power?

A generator only produces electrical power when mechanical torque is transferred to it. A rotor that spins very rapidly under almost no generator load may transfer relatively little useful power, even though its speed is high. Aerodynamic efficiency also depends on tip-speed ratio: a blade can turn too slowly or too quickly relative to incoming wind to capture energy effectively. The useful operating point comes from balancing aerodynamic torque, shaft speed, generator resistance and mechanical losses. Real variable-speed turbines track efficient operating conditions below rated wind speed, then use a combination of pitch and generator control to limit power and loads. Experiment with generator loading and compare rotor rpm against the electrical output meter to explore this distinction.

Made with 🤖 ChatGPT · Three.js