Kaplan Turbine — 2D Blade Cascade

Unrolled guide-vane and runner cascade with live velocity triangles, power against flow and the cavitation margin.

Switch to 3D

Presets

Controls

Live readouts

Experiment

Checks that the head balance closes, that an independent radial-strip torque integral equals the velocity-triangle (Euler) power, and that 150 rpm gives 50 Hz.

Not run yet.
The science

Velocity triangles. At the mean radius the runner blade moves at u = π Dm n / 60. The guide vanes turn the water to absolute velocity c1 with swirl cu1 = ca / tan α; the runner leaves it with cu2 = u − ca / tan β2. The relative velocity w is the water seen from the blade.

Euler turbine equation. The specific work is w = u (cu1 − cu2) (J/kg). The head balance is gH = w + conduit + blade friction + exit + shock losses + gate throttling; the flow is set by the gate and cut if the blades would need more head than available.

Kaplan cam. Turning the blades (auto mode) keeps the relative flow aligned with the blade leading edge, so the shock loss stays small over a wide flow range; with fixed blades the efficiency collapses at part load (compare the two curves).

Cavitation. The Thoma number σ = (Hatm − Hv − Hs) / H must stay above an empirical critical value that grows with specific speed; raising the tailwater (smaller suction height Hs) restores the margin.

Independent check. The torque is integrated over 4000 radial strips for a free-vortex runner and must equal the mean-radius velocity-triangle power. 20 pole pairs lock 150 rpm to 50 Hz.

Simplifications. Mean-radius (one-dimensional) blading, constant loss coefficients and an empirical critical sigma; no hub-to-tip variation, no transients or water hammer. The unrolled cascade is schematic. The physics module is the one used by the 3D page. Educational model, not a design tool.