Presets
Playback
Optics, display and tracking
Camera
Layers
Quality
Model check
The science
What this is. An optics-and-timing model of one eye of a VR headset: a flat display behind a magnifying lens. It shows why the picture appears far away, how wide it looks, how sharp it is, and why a little lag or blur is noticeable. Dimensions are illustrative, not the specifications of any product.
Optics (thin lens, paraxial)
- Display at distance d < f from the lens gives a virtual image: 1/v = 1/d - 1/f, so v = d f/(f - d) and magnification M = v/d = f/(f - d). The image distance is also the "focus demand" in dioptres (100/v with v in cm); the eye's focus is fixed there while the 3D scene suggests other depths (the vergence-accommodation conflict).
- From an eye at relief e the half-angle of the image of a display of width w is atan[(w/2) M/(v + e)]. The lens aperture limits the view to atan[(D/2)/e]. The field of view is twice the smaller of the two.
- Pixels per degree (ppd) = visible pixels / FOV; the central value uses the angle subtended by one pixel image. 60 ppd is the commonly quoted figure for 20/20 acuity (typical value, not exact); the readout shows how many pixels that would need.
- Lens distortion is modelled as r' = r (1 + k1 r^2) (pincushion). The software pre-warp inverts it by Newton iteration, giving the barrel-shaped frame shown in the grid graph.
Timing
- A head turn theta(t) = A sin(2 pi f t) displayed with motion-to-photon latency tau has pointing error theta(t) - theta(t - tau); its peak is about omega_max tau and rms is sqrt(2) A |sin(pi f tau)|.
- A pixel held for time p smears by omega p degrees while the head moves (hold-type blur). Converting to pixels uses the ppd above.
Independent checks
- The image position from tracing two rays (one through the lens centre, one parallel to the axis then through the focus) against the lens formula.
- A sampled simulation of the lagged head pose against the closed-form rms error.
- A distortion round trip: pre-warp then lens returns the original radius.
Simplifications
Thin ideal lens: no aberrations, no Fresnel steps, no pupil swim, a single colour (real headsets also correct chromatic aberration). Paraxial formulas are applied across the whole field. The eye is a point at the pupil that does not rotate; real FOV measurements depend on eye rotation. Latency is a constant delay; real pipelines use prediction and late re-projection. The 3D rig shows the cross-section of one eye and is not to scale for the virtual image, which is clamped at 40 cm when drawn.