♻️ Circular Economy: Material Flow and Recycling Lab

2D interactive simulation · educational model
The science

Material-flow (stock and flow) model. Products are made at a rate P (kg/yr, the demand). They stay in use for an average lifetime L, modelled as a first-order delay: the in-use stock S obeys dS/dt = P − S/L, and the end-of-life flow is W = S/L. Of that waste a fraction c is collected, and recycling recovers a fraction y of what is collected: R = c y W. Recycled material replaces virgin input V = P − R; everything else, W − R, goes to landfill or incineration.

Closed forms used as checks. Starting from empty, S(t) = P L (1 − e−t/L). At steady state S* = P L, W = P, R = c y P, V = (1 − c y) P. Mass balance must close at every instant: cumulative production = stock + cumulative waste, and cumulative inputs (virgin + recycled) = cumulative production.

Energy. Total energy E = V ev + R er + (W−R) ew using illustrative intensities in MJ/kg (virgin 60, recycled 15, disposal 2 — typical order of magnitude for metals/plastics, NOT data for any real material). Reuse/repair is modelled as a longer lifetime L: the same stock needs less production for the same service.

Honest simplifications. One generic material; exponential (not realistic age-distributed) lifetimes; recycling is instantaneous and closed-loop with no quality loss (downcycling) or contamination; demand growth is an exponential P(t) = P0 eg t; energy factors are illustrative; no economics, no rebound effects. A learning model, not a material-flow analysis of any real product. Recycling can never reach 100% in practice because of c and y both being below 1.