The coastal
trader.
A 14-metre oak vessel built to move people and goods through Danish coastal waters. Explore its construction, then test the forces that keep it afloat.
A working coastal vessel
Built around 1040 in Denmark, Skuldelev 3 had a broad cargo hold, oak clinker planking and a sail suitable for coastal voyages. The preserved wreck provides an unusually detailed basis for experimental reconstruction.
What holds the ship up?
Archimedes' principle
At floating equilibrium, upward buoyancy equals the weight of ship, crew and cargo. The simulator treats the hull's underwater volume as an empirical block-coefficient approximation.
T = m / (ρw Cb L B)
Reference dimensions L = 14 m, B = 3.3 m. A 9.6 t reference displacement at T = 0.9 m in 1,025 kg/m³ water sets Cb = 0.2197. This is a calibration, not a measured hull form. The 5.0 t unloaded mass is an illustrative difference between reference displacement and maximum cited cargo, not a measured lightship weight.
Wind and a simplified righting response
Crosswind on a 45 m² sail supplies an illustrative overturning moment. The app assumes lift coefficient 0.7, aerodynamic lever arm 3 m and metacentric height 0.75 m; these are model parameters, not documented measurements.
θ = asin(Mw / m g GM)
With ρa = 1.225 kg/m³ and g = 9.81 m/s², the model estimates heel only; it does not simulate waves, gusts, capsize, dynamic righting curves or hydrodynamic resistance.
Independent checks
The buoyant-force display is calculated from the model's submerged volume; the weight check is separately calculated from mass and gravity. Their displayed residual is a direct equilibrium check. The wind-versus-righting moment display is a second consistency check.
The solar panel uses sin(h) = sin(φ)sin(δ) + cos(φ)cos(δ)cos(H), with φ = 55.7° and H = 15° × (solar hour − 12). Equinox and solstice declinations are simplified to 0° and ±23.44°.
Evidence, interpretation and limitations
Documented: 14 m length, 3.3 m breadth, c. 0.9 m draught, oak construction, dating around 1040, 45 m² sail, 4.6 t cargo capacity, 9.6 t museum reference displacement and clinker method.
Reconstructed: the three-dimensional strake curvature, relative frame spacing, plank positions and example sailing outfit. Artistic: timber wear, sail colour, sea surface and shore landscape. The 3D hull is not a laser scan of the preserved timbers.
Educational reconstruction; details marked as reconstruction are interpretive.