🚨 Gas Release Incident Response: Plume, Alarm Delay and Evacuation

What you are seeing

A tank at the left releases an irritant gas (illustrative, not a real substance). The plume drifts with the wind. Run the four phases: assess (read wind and stability), contain (set when the source is isolated), evacuate (pick a strategy and alarm delay) and review (workers over the limit, doses, plume reach). Compare nearest muster with the least-exposure muster, or shelter in place with doors and vents shut. Changing any setting restarts the incident.

Controls

Live readouts

Numerical checks

Checks the plume formula against its closed-form crosswind integral and scaling laws.
The science

Ground-level concentration of a steady continuous point release (Gaussian plume with ground reflection): C = Q / (π u σy σz) · exp(−y²/2σy²) · exp(−H²/2σz²), release height H = 8 m, wind speed u, release rate Q. The spreads σy(x), σz(x) use Briggs rural fits for Pasquill stability classes A (very unstable) to F (very stable). Stable air disperses less, so the plume stays narrow and concentrated for much longer distances.

Time dependence is added by a transport delay: the gas reaches distance x downwind at t = x/u, and isolating the source at time tiso removes the gas that left afterwards. Workers integrate dose ∫C dt as they walk (1.5 m/s); sheltering indoors multiplies concentration by 0.2 after the alarm.

Simplifications: the limit of 40 mg/m³ is an illustrative level of concern, not a toxicology standard; no buildings or terrain effects, no heavy-gas slumping, constant wind, no turbulence puffs, and the plume is not valid very near the source. This is an educational model for hazard assessment, not an emergency-planning tool.