🌬️ Wind Turbine Lab: Betz Limit, Tip-Speed Ratio and Annual Yield

2D interactive simulation · educational model
The science

Momentum theory. A rotor of area A = πR² slows the wind from v to (1−a)v at the disk and (1−2a)v far downstream, where a is the axial induction factor. The extracted power is P = ½ρA v³ Cp with Cp = 4a(1−a)², which peaks at a = 1/3 with Cp = 16/27 ≈ 0.593 — the Betz limit. The stream tube drawn in the picture follows this: its radius is R√(1−a) far upstream and R√((1−a)/(1−2a)) in the wake.

Real rotors. Real blades reach lower Cp that depends on the tip-speed ratio λ = ωR/v and blade pitch β. The curve here is the widely used empirical fit Cp = 0.5176(116/λi − 0.4β − 5)e−21/λi + 0.0068λ with 1/λi = 1/(λ+0.08β) − 0.035/(β³+1) (peak about 0.48 near λ = 8). Below rated wind speed the controller holds the best λ (maximum power point tracking), so power grows as v³; above rated speed it pitches the blades to hold rated power, and it parks the rotor above cut-out (25 m/s) and below cut-in (3 m/s). Mechanical-to-electrical efficiency is 0.93.

Wind statistics. Site winds follow a Weibull distribution f(v) = (k/c)(v/c)k−1 e−(v/c)k with mean cΓ(1+1/k). Annual energy is ∫P(v)f(v)dv × 8760 h, and the capacity factor is that divided by rated power times 8760 h.

Honest simplifications. Quasi-steady (no rotor inertia, no gusts or turbulence, no wake of other turbines), air density constant with height, no hub-height shear, no availability or grid losses, and the empirical Cp surface is generic, not a specific machine. The animated blade speed is slowed for display when the real rotor would look like a blur.