Gyroscope on a Pivot: Precession, Nutation and the Sleeping-Top Threshold

A Blender-built gyroscope spins on a pedestal tip: set the spin, tilt and rotor, push it, and watch full 3-D rigid-body dynamics produce precession, nutation and toppling.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What is modelled

A heavy, symmetric gyroscope (a top) pivots on the tip of a pedestal. The rotor spins fast about its axis; gravity pulls on its centre of mass, a distance l from the pivot. The page integrates the complete three-dimensional rigid-body motion, so it shows the slow precession, the fast nutation wobble, the sleeping-top threshold and what happens when the spin is too slow. The Blender model supplies the pedestal, table, axle, rotor with markings and a frame ring.

Equations

  • Euler's equations in the body frame (axis e3, I1 = I2 about the pivot, I3 = ½ m R²): I1 ω1' = (I1 − I3) ω2 ω3 + τ1, I1 ω2' = (I3 − I1) ω1 ω3 + τ2, I3 ω3' = τ3, with gravity torque M g l (uy, −ux, 0) (u is the vertical in body axes) and bearing friction τ3 = −b ω3. The orientation is a quaternion, q' = ½ q (0, ω), so no Euler-angle singularities occur even when the axis is upright or horizontal.
  • Steady precession: I1 Ω² cosθ − I3 ω3 Ω + M g l = 0 has a slow and a fast root; for a fast spin the slow root tends to M g l / (I3 ω3).
  • Nutation frequency for a fast top is about I3 ω3 / I1. An upright top is stable (it "sleeps") when I3² ω3² > 4 I1 M g l.

Simplifications (honest list)

  • The rotor is a uniform disc (thickness 0.03 m) and the axle is massless; the whole body is rigid and the pivot is an ideal frictionless point.
  • Friction is a simple torque proportional to the spin about the axis; there is no air drag on the nutation and no pedestal or table collision, so a toppling gyroscope can swing through places it could not physically go.
  • The real-time integrator uses a fixed 0.5 ms Runge-Kutta step; the page labels the push impulse as an idealised instantaneous angular impulse.

Independent checks (run on page load)

Energy and vertical angular-momentum conservation over 10 s, steady precession against the closed-form root, the nutation frequency against a separate reduced Lagrange formulation, the sleeping-top threshold above and below, and the Blender geometry against the constants used by the physics.

Loading model...
Loading Blender model...
Tilt of the axis against time
Precession rate against spin rate
Path of the axis tip (top view)
Made with 🟠 Blender · Three.js