Presets
Playback
Parameters
Camera
Layers
Quality
Model check
The science
What you see. Freezing rain falls on an electrified railway. Ice builds a sleeve on the contact wire between two masts; the wire sags, swings sideways in the wind and its tension changes. The sag, the ice sleeve and the sideways swing are exaggerated by the factor you choose (default 6 times); the numbers on the panel are real values.
The wire. A wire of weight w per metre hanging between supports at equal height forms a catenary, z(x) = (H/w)(cosh(wx/H) − cosh(wL/2H)), where H is the constant horizontal tension. The sag is (H/w)(cosh(wL/2H) − 1), which for a taut wire is almost the textbook parabola wL²/8H, and the tension at the mast is H cosh(wL/2H). Wind adds a sideways drag q = ½ ρa CD U² D; the wire hangs in the plane of the resultant √(w² + q²), tilted from vertical by the blow-out angle.
How tension is found. The wire is elastic and also expands or contracts with temperature. Its length under load must equal its unstressed length, corrected for temperature, plus the elastic stretch: S(H,w) − (1/EA)∫T ds = L0(1 + α(Ta − 15)). L0 is fixed by the installation condition (the tension you set at 15 °C with no ice) and the equation is solved for H numerically. That is why a cold day tightens the wire and added ice both sags it and tightens it.
Ice. Rain water reaching the wire per second and metre is the flux times the collecting width d + 2t. If a fraction freezes, the ice annulus grows by dt/dτ = Φ/(πρi), a steady radial growth. The flux includes a wind factor √(1 + (U/vt)²) (vt about 5 m/s for drops) and a freezing fraction that grows from 0 at 0 °C to 1 at −2 °C.
Honest simplifications. One bare contact wire (copper-silver, 107 mm², 0.95 kg/m, a 15 kN installation tension) stands for the whole overhead line: real lines have a messenger wire, droppers, registration arms, tensioning weights and mid-span stagger, all of which change the numbers a lot. The freezing fraction is a rule of thumb, not a heat balance, and ice is a uniform concentric sleeve with a density of 900 kg/m³ (real glaze, rime and wet snow vary and shed unevenly). No galloping, no pantograph uplift or contact-force dynamics, no ice shedding and no melting. The 4.9 m working height and the 30 kN tension limit are illustrative.
Checks. (1) the exact catenary sag against the parabola and its first correction; (2) arc length and the tension integral against Simpson integration, and the installed state is recovered by the state-equation solver; (3) a numerical ice-mass ledger against the linear growth formula; (4) vertical force balance at the supports.