Nanotechnology Nanosensors Simulation

The dashed curve is the exact model; the orange trace is what a noisy real sensor would record. Lower the concentration until the signal disappears into the noise: that is the detection limit.
The science

A nanosensor works by reversible binding: receptors on a nanowire or cantilever capture analyte molecules, and each bound molecule changes a measurable signal (conductance, resonance frequency). With coverage θ, the Langmuir model is dθ/dt = konC(1 − θ) − koffθ. For constant C the solution is θ(t) = θeq(1 − e−kobst) with kobs = konC + koff and θeq = C/(C + Kd), Kd = koff/kon. After washing, the signal decays as e−kofft.

The limit of detection is where the equilibrium signal reaches three times the noise: CLOD = Kdθ/(1−θ), θ = 3σ/Rmax. A tight binder (small Kd) detects lower concentrations, but a slow koff makes the sensor slow to reset, and at low C the response time 3/kobs approaches 3/koff.

Simplifications: no mass-transport limit (diffusion to the surface), no non-specific binding, white Gaussian noise, a single binding-site type. The receptor picture is illustrative.