Mammoths in Deep Snow: Sinkage, Trail Compaction and the Cost of Breaking Trail

A herd of woolly mammoths wades through snow: foot pressure against snow stiffness sets the sinkage, the leader compacts the trail for the others, and the energy bill sets the daily range.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What you see. A line of woolly mammoths walking through snow. The first animal breaks the trail; each foot sinks until the snow under it can carry the load, and the trench behind the leader gets denser and thinner. The model animal is built in Blender with separately swinging legs and tundra trees and rocks; everything else (sinkage, trench, speed) is computed live.

Sinkage. Each foot carries a share of the weight, p = m g / (Nst A), with about 2.6 feet on the ground on average (duty factor 0.65). Snow resists with a Bekker-type law, p = k z, and its stiffness grows steeply with density, k = k0 (ρ/300)2.5. The foot area A is read from the mesh. The sinkage is z = min(p/k, h): it cannot exceed the depth of the snow, where the foot meets the ground.

Trail compaction. The foot squeezes the snow beneath it, so mass per area is conserved: ρnext = ρ h / (h − z) and hnext = h − z. The next animal in the same track meets denser, thinner snow and sinks less. This is why single-file travel is cheaper than each animal making its own track.

Energy. Pressing the snow costs ∫ p A dz = A k z²/2 per step, lifting the leg out of the hole costs mleg g z; with four feet and a stride of 2 m the extra metabolic cost per metre is (4/Ls)(Wc + mleg g z)/η with muscle efficiency 0.25. On hard ground the cost of transport is the Taylor et al. allometric fit 10.7 m−0.316 J/(kg m). The speed is set by a fixed locomotor power, twice the basal metabolic rate (Kleiber, 3.4 m0.75 W), so deep snow slows the herd and shortens the day's range.

Honest simplifications. The snow stiffness scale k0 = 1.5 MPa/m, its density exponent, the duty factor, stride length, leg mass fraction (4 %) and the 2 x basal power budget are illustrative values, not measurements on mammoths or snow; the only anchor is the allometric cost of transport. Snow is treated as one homogeneous layer without wind crust, layering, temperature or lateral flow; hind feet are not given the track of the front feet; belly drag in deep snow is not computed (the page only warns when the sinkage exceeds the belly clearance); feeding, calves, terrain and weather are not modelled, and the speed is not a prediction of real migrations.

Checks. (1) Snow mass per area is conserved along the track and the summed sinkages equal the thickness lost. (2) Bearing force equals the foot load and a numerical integral of pressure over sinkage equals A k z²/2. (3) Locomotor energy per day equals cost times distance, and with no snow the cost equals the Taylor formula. (4) Foot radius, hip height, standing height and belly clearance are measured from the GLB.

Loading model...
Loading Blender model...
Sinkage against snow density for animals in the line
Metabolic cost for each position in the line
Distance per day against snow depth
Made with 🟠 Blender · Three.js