Icicle Growth and Dripping: Heat Loss, Water Supply and Tate Drops

Roof meltwater freezes onto icicles at a rate set by convection and radiation; what does not freeze falls as drops whose size comes from surface tension.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What you see. The eave of a house with a snow-covered roof. Meltwater from the roof runs down seven icicles; in the cold it freezes onto them and they lengthen (time-lapse), while the part that does not freeze collects at the tip and falls as drops (real-time drops, drawn 2.5 times larger). Air temperature, wind and roof meltwater set the growth and the drip rate.

Growth. The water film stays at 0 °C and loses heat to the air by convection and to the cold sky by radiation: q = h (Tf − Ta) + εσ(Tf⁴ − Tsky⁴) with h = 5.7 + 3.8 v and a sky 18 K colder than the air. A cone of length L and radius εL has area A = π R √(R² + L²) and volume V = π R² L/3, so ρi V' = q A / Lf gives the constant lengthening rate L' = q √(1+ε²) / (ε ρi Lf), a few centimetres per hour in a hard frost, in line with field observations. Longer cones need more water: if the supply is smaller than q A / Lf the icicle becomes water-limited and its growth slows as 1/L².

Dripping. The unfrozen flow md = mw − mf reaches the tip, where a drop detaches when its weight equals the surface-tension force, m g = 2 π rt σ F (Tate's law, F = 0.7), so the period is m / md. As the icicle grows the flow that drips decreases and finally stops.

Honest simplifications. The icicle is a smooth cone of fixed taper; real icicles have ripples about 1 cm apart (not modelled), a hollow core and a tip shape that depends on impurities and wind. The film temperature is fixed at 0 °C, evaporation, solar heating and heat conducted through the roof are ignored, the sky temperature offset is a rough value, the Harkins-Brown factor and the 1.5 mm tip ring are assumed, and the other six icicles are the main one scaled by fixed factors.

Checks. (1) the closed-form linear growth against integration of the full volume balance; (2) exact T4 radiation against its linearisation; (3) water ledger and drop count over 20 minutes; (4) Tate drop size against the capillary length (Bond number of order one).

Loading model...
Loading Blender model...
Growth rate against air temperature
Drip rate against icicle length
Predicted main icicle length against time
Made with 🟠 Blender · Three.js