Rate of a clock. In the Schwarzschild metric a clock moving at speed v at radius r runs at dτ/dt = √(1 − 2GM/(rc²) − v²/c²) relative to far-away coordinate time. For a circular orbit v² = GM/r, so dτ/dt = √(1 − 3GM/(rc²)). A clock on the ground sits on the geoid, where the combined gravitational and centrifugal potential is W0 = 6.2636856×10&sup7; m²/s² (a typical IERS value), so dτ/dt = √(1 − 2W0/c²).
Budget. To first order: speed effect −GM/(2rc²) (clock slower), gravity effect +(W0 − GM/r)/c² (clock faster). For GPS (r = 26,562 km) this gives roughly −7.2 and +45.7, net about +38.6 μs per day. Multiplying by c gives the ranging error: about 11.6 km per day if the effect were ignored. Real GPS satellite clocks are pre-set slightly slow to cancel the average offset, and receivers also correct for orbit eccentricity.
Simplifications. Circular orbit, spherical point-mass Earth for the satellite (J2 and tides ignored), Moon's pull and the Sun's potential neglected, no Sagnac or atmospheric delays. The "Moon distance" preset places a satellite on a circular orbit at the Moon's mean distance for comparison only; a real lunar clock would also feel the Moon's and Sun's potentials. Orbit radii in the 3D view are visually compressed; the clock arithmetic uses true distances.
Models and textures were built in Blender and baked with Cycles; Three.js r160 renders them.