Loading 3D assets...
...
Drag to orbit - wheel / pinch to zoom

Nanowire Thermal Conductivity: Phonon Boundary Scattering in a Callaway-Type Model

Heat in a silicon-like nanowire is carried by phonons. In a thin wire they hit the surface before they scatter inside the crystal, so the conductivity drops below the bulk value. Change diameter, temperature and surface smoothness and watch Monte Carlo phonons travel from the hot contact to the cold one.
Wire conductivity κ-
Bulk crystal κbulk-
κ / κbulk-
Pure-boundary (Casimir) limit-
Boundary free path ΛB = D/(1−p)-
Bulk free path of main phonons-
Heat flow, ΔT = 10 K over 1 µm-
Monte Carlo free path / expected-
κ (W/m/K) vs diameter (nm, log) at the chosen T: green wire, grey dashed bulk, orange boundary-only limit. Dot: current wire.
κ vs T (K): green this wire, grey bulk. Boundary scattering removes the low-temperature peak.
Independent numerical checks
Each line compares two separate calculations; a FAIL would show here.
The science

Kinetic theory with a relaxation time. Using a Debye spectrum with one effective sound speed v, κ = (kB/2π²v)(kBT/ℏ)³ ∫0θ/T x⁴eˣ/(eˣ−1)² τ(x) dx with x = ℏω/kBT. Scattering rates add (Matthiessen): 1/τ = B ω² T e−θ/3T + A ω⁴ + (v/D)(1−p): Umklapp, isotope/point defects, and the wire surface. Here v = 6000 m/s, n = 5×10²&sup8; m-3 (so θ = 658 K), A = 2.4×10-45 s³ and B = 3.8×10-19 s/K, chosen so the bulk value is close to silicon's ~150 W/m/K at 300 K. These are illustrative fit values, not a measured material table.

Boundary limit. If every phonon scatters only at a diffusely reflecting wall, the mean free path is the mean chord 4V/S = D for a cylinder (Cauchy). Then κCas = (1/3) C v D = 2π²kB⁴T³D/(15ℏ³v²) at low T (Casimir 1938). The Monte Carlo panel measures this mean free path directly: random flight in the wire cross-section, diffuse (cosine-law) re-emission with probability 1−p, mirror reflection with probability p.

Simplifications. One averaged phonon branch (no dispersion, no separate transverse/longitudinal modes), no Normal-process correction of the Callaway model, wire modelled as an infinite circular cylinder of diameter D (the 3D model is hexagonal for looks), no phonon confinement or surface oxide, and the 1−p factor is the simple diffuse-fraction form, not Ziman's (1+p)/(1−p). Real silicon wires of ~50 nm measure far below bulk (tens of W/m/K), which this model reproduces only in order of magnitude.

Models and textures were built in Blender and baked with Cycles; Three.js r160 renders them.

Made with 🟠 Blender · Three.js