Green Technology Biomimicry Simulation

Design a lotus-inspired surface: change the micro-pillars and the tilt. A drop that rolls off cleans the dust it passes.
The science

On a rough hydrophobic surface the apparent contact angle follows two models. Young: cosθY on a flat sheet. Cassie-Baxter (air trapped between pillars): cosθ* = f(cosθY+1) − 1, where f=πd²/(4p²) is the solid fraction of round pillars at pitch p. Wenzel (liquid fills the grooves): cosθ* = r cosθY with roughness r=1+πdh/p². The Cassie state is the stable one when cosθY < (f−1)/(r−f).

The drop volume gives its shape through the spherical-cap formula V=(πR³/3)(2+cosθ*)(1−cosθ*)². It starts to slide when the weight component beats contact-line pinning: sinαc = γw(cosθr−cosθa)/(ρVg), with width w=2R sinθ*. The lotus leaf (and biomimetic coatings) has small f and tiny hysteresis, so drops roll off at a few degrees and pick up dirt.

Simplifications: the advancing/receding hysteresis is a heuristic (grows with the solid fraction, larger in the Wenzel state), the drop is a perfect cap (gravity ignored for shape), the pillar view is schematic, and the rolling speed is qualitative.