Fitness Recovery Training: Fitness-Fatigue Model

Plan training loads and watch fitness, fatigue and performance evolve in the Banister impulse-response model.

Fitness, fatigue and performance over 120 days

Green: fitness. Red: fatigue. Blue: performance change from baseline. Grey bars: daily load. Click the chart to jump to a day.

Effect of one single session (impulse response)

Net effect k1 e-t/tau1 - k2 e-t/tau2 of one unit of load. The dashed line marks the analytic day t* of maximum net effect; if k2 tau1 is not larger than k1 tau2 there is no dip and the effect decays monotonically.

Reading the readouts

Performance starts from a baseline of 100 plus fitness minus fatigue. Fitness and fatigue are shown as the already multiplied k1 and k2 terms, so Form (Fitness minus Fatigue) equals Performance - 100. Peak shows the best performance reached so far and the day it happened; during a taper the peak day moves later than the last hard session, as the single-session curve predicts.

How to use

  • Pick a plan and press Play: the white cursor advances one day at a time.
  • Raise k2 or tau2 to make sessions more tiring; raise tau1 for slower but longer lasting gains.
  • Compare Steady against Taper: with a taper, performance peaks a few days after the last hard week.
  • Overreaching shows how piling up fatigue can push performance below the starting level.