Presets
Playback
Dashed lines: lever arms from each joint to the load line. Arcs: net joint torque. Educational static model, not training advice.
Lifter and bar
Camera
Layers
Quality
Model check
The science
Educational biomechanics, not lifting or medical advice. This is a static, planar model of one posture family. It does not say which technique is safe or best for any person; consult a qualified coach or clinician for training and injury questions.
Posture by inverse kinematics
The bar hangs from straight arms, so the shoulder sits directly above the bar (offset by the "bar position" slider from mid-foot). Given the bar height and trunk angle θ, the hip is shoulder - L_trunk (cosθ, sinθ) and the knee follows from a two-link solution with the ankle fixed: law of cosines cosδ = (L_s^2 + d^2 - L_t^2)/(2 L_s d), knee forward of the line ankle-hip. If the legs cannot reach, the trunk angle is raised to the reach limit. Segment lengths, masses and centres of mass are typical anthropometric fractions of body height and mass (Winter-type tables, flagged as typical values): shank 0.246 H, thigh 0.245 H, hip-shoulder 0.288 H, arm 0.44 H; HAT (head, arms, trunk) 67.8 % of body mass with its centre 0.6 of the way up the trunk.
Net joint torques
For a quasi-static pose the torque a joint must supply equals the moment of every weight above it: hip = W_bar (x_s - x_h) + W_HAT (x_HAT - x_h); knee and ankle similarly, with the thigh and shank weights. Each term is weight times a horizontal lever arm, so a longer back lever or a bar ahead of the feet raises hip and ankle torque. At a straight trunk tau_hip = L_trunk cosθ (W_bar + 0.6 W_HAT).
Independent check by virtual work
Torques are also computed as tau_i = dU/dq_i, the derivative of gravitational potential energy with respect to each relative joint angle (central finite difference). This uses only heights, whereas the free-body method uses only horizontal distances, so agreement tests both the geometry and the algebra.
Ground reaction
The ground force equals the total weight and acts at the centre of pressure x_cop = sum(W x)/sum(W). If it leaves the foot (heel -0.29 L_foot to toe +0.71 L_foot from the ankle) the static pose would tip, which is why the bar must stay close to mid-foot.
Simplifications
Quasi-static: no inertia, bar acceleration or velocity-dependent forces, which in real lifts can add a lot of load; both sides collapse into one plane; net joint torque, not individual muscle forces; no spine mechanics, so no estimate of spinal loading or injury risk; trunk angle changes linearly with bar height, which is only one possible lifting path. The mannequin, bar, plates and platform were modelled and texture-baked in Blender; plates are drawn rounded to 20 kg discs.