Viscoelastic tissue. Muscle, tendon and fascia resist stretch like a spring plus a damper. The simplest model that shows both stress relaxation and creep is the standard linear solid: a spring K₁ in parallel with a Maxwell branch (spring K₂ in series with damper C), written for the hip joint in N·m/rad: τ = K₁θ + K₂(θ − θd), dθd/dt = K₂(θ − θd)/C. The relaxation time is τr = C/K₂.
Static hold. Held at a fixed angle, torque decays: τ(t) = θ[K₁ + K₂ e−t/τr]. That is why a stretch feels easier after 20-30 seconds. Constant torque (stretching to a steady, tolerable sensation) gives creep: the angle keeps rising from τ/(K₁+K₂) to τ/K₁ with time constant C(K₁+K₂)/(K₁K₂).
Dynamic swings. For a sinusoid of amplitude a and angular frequency ω the energy lost per cycle is W = π K₂ a² ωτr/(1+ω²τr²). Fast swings barely load the damper (small loop), slow ones lose more energy as heat.
Stretch tolerance. Reviews of regular stretching report that range of motion rises mainly because people tolerate a higher torque (sensory adaptation), with smaller changes in tissue stiffness. The training panel uses an illustrative saturating rule T = T₀(1 + g(1 − e−D/6)) with effective dose D in weeks (reduced when weekly volume is under 10 minutes). Numbers are typical, not clinical; this is not medical advice, stretch gently and stop at mild discomfort, never pain.
Simplifications. Linear springs and one damper, one muscle group, constant moment arm, no neural reflexes, no tendon/muscle split, no temperature or fatigue model other than the warm-up preset (lower K and C).