Eclipse Shadow-Cone Lab: Umbra, Penumbra and the View from the Ground

Sun, Moon and Earth at true scale: watch the Moon's umbra and penumbra sweep across a rotating Earth, then look through an eyepiece at the exact eclipse seen from one spot.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What is modelled

The Moon casts two nested cones of shadow. Inside the narrow umbra the whole Sun is hidden (total eclipse). Beyond the umbra tip the cone opens again as the antumbra, where the Moon looks smaller than the Sun and leaves a ring (annular eclipse). The wide penumbra hides only part of the Sun (partial eclipse). The page puts the Sun, Moon and Earth at their true sizes and distances (1 scene unit = 10 000 km), moves the Moon's shadow across a rotating Earth, and lets you stand at one place on the ground and see what the sky does.

The shade on the globe is computed per pixel from the exact overlap of the Sun's and Moon's discs as seen from that point, so the dark spot, its soft edge and the wide penumbral dimming are not drawn by hand. The Earth map is a stylised procedural planet, not real geography.

Equations

  • Shadow cones: sin f2 = (Rs - Rm)/Dsm (umbra), sin f1 = (Rs + Rm)/Dsm (penumbra), with Rs = 695 700 km, Rm = 1 737.4 km and Dsm the Sun-Moon distance.
  • Umbra length (apex behind the Moon): L = Rm Dsm / (Rs - Rm), about 374 000 km. The Moon is 356 400 to 406 700 km away, so the tip sometimes reaches the ground (total) and sometimes stops short (annular).
  • Umbra radius at depth q behind the Moon: ru = (L - q) tan f2; a negative value means the observer is beyond the tip (antumbra). Penumbra radius: rp = (q + L1) tan f1 with L1 = Rm / sin f1.
  • Magnitude at an observer a distance m from the axis: (rp - m) / (rp - ru). Exact version: angular radii as = asin(Rs/dS) and am = asin(Rm/dM) from the observer, separation sg, magnitude (as + am - sg)/(2 as), uncovered area from the circular-lens formula.
  • Observer position in the fundamental frame (latitude phi, Sun declination d, hour angle H): xi = cos phi sin H, eta = sin phi cos d - cos phi sin d cos H, zeta = sin phi sin d + cos phi cos d cos H (Earth treated as a sphere of radius 6 378.137 km). Hour angle advances 15.041 degrees per hour.
  • Moon speed from the vis-viva equation v = sqrt(GM (2/r - 1/a)) with GM = 403 503 km^3/s^2 (Earth plus Moon) and a = 384 400 km; the shadow axis moves across the fundamental plane at that speed.

Checks run in the page

  • The closed-form umbra length equals the apex found by bisecting the tangent condition asin(Rm/a) = asin(Rs/(a + Dsm)).
  • The shadow-cone magnitude at greatest eclipse agrees with the exact angular-overlap magnitude (within 0.01).
  • The lens formula for two overlapping discs matches a 700 x 700 grid count.
  • For the textbook longest totality (Moon at perigee, Sun at aphelion, zenith, equator) the second-by-second duration matches 2 ru / v_rel and falls near the published maximum of about 7 min 32 s.

Honest simplifications

  • Earth is a sphere (no flattening, no terrain or atmosphere refraction); the Moon is a sphere without limb mountains, so Baily's beads and the diamond ring are only hinted at, and the corona is a drawn sprite, not a solar model.
  • The Moon's orbit near the event is a circle of radius dm around the Earth's centre traced at the vis-viva speed; the axis misses by a constant offset b. Real eclipses use full lunar and solar ephemerides, so this is a teaching model, not a prediction tool.
  • Sun parallax across the Earth (about 2 arcseconds) is ignored in the shading, and the Sun is shown as a uniform disc (no limb darkening).
  • For real dates and paths of eclipses use published NASA/USNO tables. Never look at the real Sun without certified eclipse glasses (ISO 12312-2).

What to try

  • Run the total and annular presets and compare the umbra radius and the position of the tip in graph 3.
  • Open the eyepiece view and set the playback slow: at totality the corona appears and the sky darkens (sunlight in graph 2).
  • Raise b to 0.3 Earth radii: the umbra misses and only a partial eclipse remains.
Loading model...
Loading Blender model...
Eclipse magnitude at the observer against time
Sunlight reaching the observer (totality shaded)
Umbra radius at the observer against Moon distance
Made with 🟠 Blender · Three.js