Light in a fibre: attenuation, dispersion, eye diagram and bit-error rate.
Light guiding. A core of index n1 inside a cladding n2 < n1 traps rays by total internal reflection when they hit the wall beyond the critical angle θc = asin(n2/n1). The numerical aperture is NA = √(n12 − n22). Single-mode fibre has a 9 µm core so only the axial mode survives; multimode fibre (50 µm) carries many ray paths of different length.
Loss. Power falls exponentially: P(L) = P0 · 10−αL/10, α in dB/km (typical 0.20 at 1550 nm, 0.35 at 1310 nm, ~2.5 at 850 nm multimode; plus 1 dB for connectors). The receiver needs a minimum average power, taken here as −22 dBm at 10 Gb/s and scaled with bit rate (typical PIN receiver, illustrative).
Dispersion. Different wavelengths travel at different speeds: chromatic broadening σchrom = |D|·L·Δλ (D = 17 ps/nm/km at 1550 nm, ~0–1 near 1310 nm). In multimode fibre modal spreading dominates: bandwidth×length 500 MHz·km gives a 3 dB bandwidth BWL/L and rms width 0.1874/f3dB. Widths add in quadrature with the transmitter and receiver (Gaussian) responses. When the pulse spreads over neighbouring bit slots the eye closes (inter-symbol interference) and the BER rises. Compensation (dispersion-compensating fibre or DSP) removes most of the chromatic term; modelled as 95 %.
Error rate. Noise is Gaussian, so for each of the 27 neighbour bit patterns the error probability is ½erfc(Δ/(σ√2)); the BER is their average. The page also counts errors in 1.5 million sampled bits.
Simplifications. Linear (low-power) regime: no non-linear effects, polarisation-mode dispersion, amplifier noise or FEC; one fixed receiver model; constants are typical, not a data sheet.