Cochlea — 3D model: travelling wave on the basilar membrane

Switch to 2D
Drag to orbit, wheel / pinch to zoom. Membrane height is shown square-root compressed and heavily magnified.
Sound
Peak place
Characteristic freq.
Peak displacement
Tuning Q (active)
Width (-3 dB)
Compression
What to try
  • Sweep the frequency: the glowing peak slides along the coil from the base (high pitch) toward the apex (low pitch).
  • Add a second tone near the first: the two humps overlap (masking).
  • Set hair-cell health to 0: the hump drops and broadens; the dead-cell gain loss is about 14 dB.
  • Turn the level up to 100 dB: tuning broadens as the active gain saturates.
The science

Place-frequency map (Greenwood 1990, human): F(x) = 165.4 (102.1 x − 0.88) Hz, x the fractional distance from the apex along a 35 mm duct, so F runs from about 20 Hz to 20.7 kHz. The duct is drawn as the real 2.75-turn coil, base (stiff, high pitch) at the stapes.

Each point of the basilar membrane acts as a damped resonator with characteristic frequency CF(x). With r = f / CF the response is 1 / |1 − r² + i r/Q|; the travelling wave slows as r approaches 1, peaks near r ≈ 1 and dies quickly beyond (long-wave WKB phase gain k = K0 r / √(1 − r² + i r/Q)).

Outer hair cells add active gain: Q rises from 2.5 (passive) to 12 (healthy) and saturates with level, Q = 2.5 + 9.5 h / (1 + 10(L−50)/20), giving compression and level-dependent broadening. At resonance the peak scales with Q, so the active gain is about 20 log10(12/2.5) = 13.7 dB (checked in the experiment).

Simplifications: displacements are in model units (1 nm at the peak of a healthy 1 kHz, 40 dB tone), the animation is slowed by orders of magnitude, the ossicle chain is schematic and the coil shape is stylised. Real cochlear mechanics include fluid coupling, nonlinear amplification and cochlear delays; K0 and the Q values are illustrative, not fitted to a specific ear. Not a diagnostic tool.

Made with 🟠 Blender · Three.js